Anatoliy, Don't know whether you will have had an answer off thread but here is one to consider.
The Broadcom chipset has been successfully made to run under FreeBSD, so there should not be a problem with the card per se. You will certainly need to get NDISulator (a.k.a. Project Evil) running and may have to ask on the mobile@ about successfully tried Windoze drivers to incorporate. The real problem you have is that your cardbus card is not being activated. There is a thread running now on mobile@ that seems to suggest that recent changes in CURRENT have broken cardbus support. Can I suggest following this thread and building against CURRENT when it appears to be fixed? 5.2.1p1 has been subject to a few advisories anyway so you really should be running a later patch set. Jon > Heya, > > I'm trying to get linksys wireless adapter to work with my laptop. > I have Compaq Evo n610c. Linksys WPC54G pcmcia adapter. > > So far I have seen many hints on how this stuff works, but coudn't put it > all together. > > uname > FreeBSD evo 5.2.1-RELEASE #1: Mon Jun 14 17:53:54 EDT 2004 > [EMAIL PROTECTED]:/usr/src/sys/i386/compile/EVO i386 > > Basicly in rc.conf > pccard_enable="YES" # pcmcia startup > > plugging card out and back in gives me in messages.log this > end (ffffffff) > sc->memlimit (403fffff) > end (ffffffff) > sc->memlimit (403fffff) > cardbus0: <network> at device 0.0 (no driver attached) > cbb0: CardBus card activation failed > > > in /boot/loader.conf > # PCMCIA card battle > hw.cardbus.debug="1" > hw.cardbus.debug_cis="1" > > hw.cbb.start_memory="0xd0213500" > hw.cbb.start_32_io="0x4096" > hw.cbb.start_16_io="0x256" > > hw.pci.enable_io_modes="1" > hw.pci.allow_unsupported_io_range="1" > > if_wi_load="YES" # WaveLAN/IEEE 802.11 wireless NICs > # end PCMCIA battle > > and finaly > pciconf -lv > [EMAIL PROTECTED]:0:0: class=0x028000 card=0x43201737 chip=0x432014e4 rev=0x03 > hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'BCM4306(??) 802.11g Wireless NIC' > class = network > > .................................. > so. Have anyone get this sanamabish to work? > and if yes, how? Do I need to use ndiswrapper? > > All thoughts are greatly appreciated. > Cheers, > > > > > Anatoliy > _______________________________________________ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"