On Sat, Jun 26, 2004 at 07:27:40PM -1000, [EMAIL PROTECTED] wrote:
> Aloha Scott and thanks for staying awake and responding.
> I thought I had tried all of that camcontrol stuff
> before I posted but I am getting old so I tried what
> you suggested. Alas, it did not seem to help. Here is
> the output of the attempt:
Weird - that's what works for me, so I don't know how much more help I can
offer, but here are a few suggestions that might help us figure out what's
> Boot with 128MB card installed.
> hp# ls -l /dev/da*
> crw-r----- 1 root operator 4, 20 Jun 26 18:50 /dev/da0
> crw-r----- 1 root operator 4, 21 Jun 26 18:50 /dev/da1
> crw-r----- 1 root operator 4, 22 Jun 26 18:50 /dev/da2
> crw-r----- 1 root operator 4, 24 Jun 26 18:50 /dev/da2s1
> crw-r----- 1 root operator 4, 23 Jun 26 18:50 /dev/da3
Ah... you're running FreeBSD 5 - it was pretty late when I wrote that first
reply, so I didn't notice that immediately. Unlike FreeBSD 4, where stuff
in /dev/ had to be created manually, FreeBSD 5 uses devfs to create the
device nodes as needed, when devices come and go. I haven't actually used
my card reader on 5 yet, so I could be missing something obvious here...
> Remove 128MB card and insert 8MB card
> hp# camcontrol rescan 0:0:2
> Re-scan of 0:0:2 was successful
What does 'fdisk da2' give you at this point?
Do you get anything in /var/log/messages when you insert the new card?
It might be worth doing a 'camcontrol start' after the rescan, just in
case, but I don't really think that will make any difference.
Since you're running FreeBSD 5, it might be worth re-porting your question
to the freebsd-current mailing list, to see if anyone there can shed some
light on this.
Sorry I can't be more help,
Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels
Cambridge, England | 0x54B171B9 | don't get sucked into jet engines"
scott at fishballoon.org | 0xAA775B8B | -- Anon
[EMAIL PROTECTED] mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"