Hi,
since 3 days ago, I updated my FreeBSD-current box using up-to-date sources.  
Since that time, my box is unstable, it freezes often with the message: 
"softdep_setup_inomapdep: found inode".  And I can't relate it to any 
behavior.  It happens sometimes when it's idle, sometime when it's working, 
sometime when it's almost only downloading, it seems random to me.  I've done 
many kernels trying to find out what is going wrong by I can't isolate it.

Here are infos which may help:
- dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #7: Mon Jul 12 14:43:45 EDT 2004
    [EMAIL PROTECTED]:/usr/obj/usr/src/sys/vincey
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm)  (1094.15-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536805376 (511 MB)
avail memory = 519802880 (495 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 11 Entries> on motherboard
pci0: <PCI bus> on pcib0
$PIR: No matching entry for 0.1.INTA
$PIR: No matching entry for 0.2.INTA
$PIR: No matching entry for 0.2.INTB
$PIR: No matching entry for 0.2.INTC
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <serial bus, USB> at device 2.0 (no driver attached)
pci0: <serial bus, USB> at device 2.1 (no driver attached)
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
pcm0: <Creative Audigy 2 (EMU10K2)> port 0xd000-0xd03f irq 10 at device 7.0 on 
pci1
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
pci1: <serial bus, FireWire> at device 7.2 (no driver attached)
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xd800-0xd81f irq 11 at device 
9.0 on pci1
ed0: [GIANT-LOCKED]
ed0: Ethernet address: 00:c0:a8:50:e2:f6
type NE2000 (16 bit) 
atapci0: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f,0x376,
0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
cpu0 on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xc8fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,
0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 990C> PRINTER MLC,PCL,PML
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0a03> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 1094146253 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 78167MB <Maxtor 6Y080L0> [158816/16/63] at ata0-master UDMA133
ad1: 76344MB <MAXTOR 6L080J4> [155112/16/63] at ata0-slave UDMA133
Mounting root from ufs:/dev/ad0s2a

- KERNCONF
machine         i386
cpu             I686_CPU
options         CPU_ATHLON_SSE_HACK
options         CPU_ENABLE_SSE
options         NO_F00F_HACK
ident           *ident*

options         SCHED_ULE               #4BSD scheduler
options         INET                    #InterNETworking
options         FFS                     #Berkeley Fast Filesystem
options         SOFTUPDATES             #Enable FFS soft updates support
options         UFS_ACL                 #Support for access control lists
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         COMPAT_FREEBSD4         #Compatible with FreeBSD4
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time 
extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
device          npx

device          isa
device          eisa
device          pci

device          fdc
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
options         ATA_STATIC_ID           #Static device numbering
device          atapicam
device          scbus
device          cd
device          pass

device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
device          psm             # PS/2 mouse
device          vga             # VGA video card driver
device          splash          # Splash screen and screen saver support
device          sc

device          sio             # 8250, 16[45]50 based serial ports
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer

device          random          # Entropy device
device          loop            # Network loopback
device          ether           # Ethernet support
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)

device          bpf             # Berkeley packet filter
options         HZ=2000
options         PFIL_HOOKS      # pfil(9) framework
options         RANDOM_IP_ID
device          pf
device          pflog
options         ALTQ
options         ALTQ_CBQ        # Class Bases Queueing
options         ALTQ_RED        # Random Early Drop
options         ALTQ_RIO        # RED In/Out
options         ALTQ_HFSC       # Hierarchical Packet Scheduler
options         ALTQ_CDNR       # Traffic conditioner
options         ALTQ_PRIQ       # Prioirity Queueing


DrVince
[EMAIL PROTECTED]

_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to