On Mon, Jul 19, 2004 at 02:17:00AM +0200, Chris Knipe wrote: C> Thank you all for the replies. The card is a Senao NL-2054PCI, based on the C> Atheros chipset... pciconf -lv reports: C> C> [EMAIL PROTECTED]:9:0: class=0x020000 card=0x2027168c chip=0x0013168c rev=0x01 C> hdr=0x00 C> vendor = 'Atheros Communications Inc.' C> device = '802/11b/g AR5212 wireless Adapter' C> class = network C> subclass = ethernet C> C> As I did indicate, the card is working and functioning properly - I am 99% C> sure it is a problem related with PPPoEd, or something in regards to PPPoE C> over the Ethernet card (which, can also be possible I guess). I've tried C> all the other suggestions that was made, and none of them seemed to have C> changed anything. From what I can see, the client sends and attempts to C> initiate the PPPoE connection properly, but the PPPoE daemon does not C> receive the packets / or does not initiate a session - which, needs to be C> completed before any sub processes will be spawned.
Try to activate this paragraph in ng_pppoe.c: #if 0 #define AAA printf("pppoe: %s\n", __func__ ); #define BBB printf("-%d-", __LINE__ ); #else #define AAA #define BBB #endif I mean change "if 0" to "if 1". Then rebuild a new ng_pppoe.ko. Then try to connect, ensure that you see PADI's with tcpdump. And then report what do you have (or have not) logged on console. Thanks. C> for this. Are there possibly any other open source PPPoE Daemons available C> that I can possibly try on FreeBSD 5.2?? Seems like the issue is either with network driver or ng_pppoe, not with pppoed daemon. -- Totus tuus, Glebius. GLEBIUS-RIPN GLEB-RIPE _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"