Ok my setup is something a little different but still works on the same premise
Internal Lan --- 10base Hub --- FBSD -- Internet THe only thing that I have different is the 24 port hub inbetween my lan and the FreeBSD box. It's been awhile since it was configured but here is an excerpt from my rc.conf file: network devices="vr0 dc0 lc0" ifconfig_vr0="media10BaseT/UTP up" (This is my internet connection) ifconfig_dc0="***.***.***.*** 255.255.255.0" (Lan Card) gateway_enable="yes" The ip for the internal LAN has been masked because they are routable IP's and I am having problems with attacks on my network right now. I am not sure you can do what you want to without a hub between a pc and b pc as if my logic serves me correct both network cards would have to be set as a gateway. Hopefully this gets you pointed in the right direction. Rob G No Special Titles ----- Original Message ----- From: "lily" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, August 17, 2004 10:33 PM Subject: Config freebsd as getway Dear all: I have install freebsd 4.x,and have two netcards. I want it as getway. I have config gateway_enable=YES in rc.conf,and then reboot. [a pc]--------[freebsd]-------[b pc] After reboot , I try to use a pc to ping b pc ,it`s not work ,but a pc and b pc can ping freebsd successful,why? Please give me a hand. Thanks!! LILY _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"