I am having trouble burning an iso image to a CD-R using FreeBSD 4.10. I have tried using
burncd , cdrecord, and growifofs, all appear to have basically the same problem (see details below)
"Operation not permitted". The only thing bugs me is dmesg reports my drive as a DVD-R.
I am not sure if this is the problem or how to addressing correcting it if it is. Note: the BIOS
report the drive to be TOSHIBA DVD-ROM SD-R6112 1031.


Can anyone give me some direction as to what I should try next, or better, I can the burner working?

Details:

FYI: I read the CD-Writing Howto and several other articles and followed
the instructions therein to the best of my ability (you be the judge). This
included:

- logging in as root;
- adding "device atapicam" to the kernel configuration and rebuilding the kernel;
- creating /etc/devfs.conf as follows:


link    acd0    cdrom
link    acd0    dvd
perm    acd0    0660
perm    cd0     0660
perm    pass0   0660
perm    pass1   0660
perm    pass2   0660
perm    pass3   0660
perm    xpt0    0666

- installing cdrecord, dvd+rw-tools
- ensure that the drive can read CD's and DVDs - running ./MAKEDEV pass10 in the /dev directory


also added these

hw.ata.ata_dma="1"
hw.ata.atapi_dma="1"

to /boot/loader.conf

mount -t cd9660 /dev/cd0 /cdrom         # works fine CD's and DVD's

Here's some things I tried:

burncd -f /dev/acd0c -s 12 data 5.2.1-RELEASE-i386-disc1.iso fixate
burncd: open(/dev/acd0c): Operation not permitted

cdrecord -scanbus
Cdrecord 2.00.3 (I386 .....
cdrecord: Operation not permitted. Error opening /dev/pass0 Cam error 'camreal_
opendevice: coundn't open passthr. Cannot open SCSI driver.

growisofs -dvd-compat -speed=4 -Z /dev/cd0c=5.2.1-RELEASE-i386-disc1.iso
:-( unable to cam_open_pass("/dev/pass0", O_RDWR): Operation not permitted.

dmesg |grep DVD
acd0: DVD-R <TOSHIBA DVD-ROM SD-R6112> at ata1-master UDMA33
cd0: <TOSHIBA DVD-ROM SD-R6112 1031> Removable CD-ROM SCSI-0 device

atacontrol list
ATA channel 0:
        Master: ad0 <TOSHIBA MK8026GAX/PA001G> ATA/ATAPI rev 6
        Slave:  no device present
ATA channel 1:
        Master: acd0 <TOSHIBA DVD-ROM SD-R6112/1031> ATA/ATAPI rev 5
        Slave:  no device present

camcontrol devlist <TOSHIBA DVD-ROM SD-R6112 1031> at scbus1 target 0 lun 0 (pass0, cd0)

Hardware:

MB:       VIA EPIA-CL10000, 512MB RAM, Award BIOS 6.00pw
Burner:   Toshiba SD-R6112 DVD-RW



_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to