On Wednesday, 10 November 2004 at 8:58:27 -0500, Ada Cheng wrote: > Good morning, > I am trying to connect my Minolta Z2 camera with my box, currently > running 4.10 stable. > > ... > > After rebuilding the kernel and rebooting, I tested the configuration by > plugging in my camera. The following is the output of dmesg: > umass0: KONICA_MINOLTA DiMAGE Z2, rev 2.00/1.00, addr 2 > umass0: BBB reset failed, TIMEOUT (this is repeated if I don't unplug the > camera)
Hmm. Not good. > If I do a camcontrol devlist I obtain > <KMCA DiMAGE Z2 1.00> at scbus1 target 0 lun 0 (probe0) > > so I guess the camera is recognized but no device node was probed. > > I am also getting the following error when i do > $mount -t msdos -r /dev/da0s1c /camera > msdos: /dev/da0s1c: Device not configured > which I guess isn't too surprising. > > I have read various threads regarding this TIMEOUT failure error and > some has suggested doing some quirks with the src/sys/cam/scsi/scsi_da.c > file which I am not comfortable with doing. I'm in a similar (but not the same) situation with a Ricoh camera. I can understand your position. > Will a SD card reader solve this problem? Almost certainly. That's what I did. See http://www.lemis.com/grog/diary-nov2004.html#7 for more details. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply or reply to the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers.
pgpsoGnNRo4SX.pgp
Description: PGP signature
