Hello folks ,
i installed poptop to make a pptp server . I'm trying to connect from
a win2k workstation but with no luck ... and i get this messages ..
Dec 16 13:41:57 madalina ppp[960]: Phase: Using interface: tun0
Dec 16 13:41:57 madalina ppp[960]: Phase: deflink: Created in closed
state
Dec 16 13:41:57 madalina ppp[960]: Command: loop: set device
localhost:pptp
Dec 16 13:41:57 madalina ppp[960]: Command: loop: set dial
Dec 16 13:41:57 madalina ppp[960]: Command: loop: set login
Dec 16 13:41:57 madalina ppp[960]: Command: loop: set ifaddr
192.168.13.1 192.168.13.100-192.168.13.200 255.255.255.255
Dec 16 13:41:57 madalina ppp[960]: IPCP: Selected IP address
192.168.13.189
Dec 16 13:41:57 madalina ppp[960]: Command: loop: set server /tmp/loop
******** 0177
Dec 16 13:41:57 madalina ppp[960]: Phase: Listening at local socket
/tmp/loop.
Dec 16 13:41:57 madalina ppp[960]: Command: pptp: enable chap
Dec 16 13:41:57 madalina ppp[960]: Command: pptp: disable pap
Dec 16 13:41:57 madalina ppp[960]: Command: pptp: accept dns
Dec 16 13:41:57 madalina ppp[960]: Command: pptp: set dns 192.168.13.1
212.93.139.1
Dec 16 13:41:57 madalina ppp[960]: Command: pptp: set device
!/etc/ppp/secure
Dec 16 13:41:57 madalina ppp[960]: Phase: PPP Started (direct mode).
Dec 16 13:41:57 madalina ppp[960]: Phase: bundle: Establish
Dec 16 13:41:57 madalina ppp[960]: Phase: deflink: closed -> opening
Dec 16 13:41:57 madalina ppp[960]: Phase: deflink: Connected!
Dec 16 13:41:57 madalina ppp[960]: Phase: deflink: opening -> carrier
Dec 16 13:41:57 madalina ppp[960]: Phase: deflink: carrier -> lcp
Dec 16 13:41:57 madalina ppp[960]: LCP: FSM: Using "deflink" as a
transport
Dec 16 13:41:57 madalina ppp[960]: LCP: deflink: State change Initial
--> Closed
Dec 16 13:41:57 madalina ppp[960]: LCP: deflink: State change Closed -->
Stopped
Dec 16 13:41:58 madalina ppp[960]: LCP: deflink: LayerStart
Dec 16 13:41:58 madalina ppp[960]: LCP: deflink: SendConfigReq(1) state
= Stopped
............... [snip]
Dec 16 13:41:58 madalina ppp[960]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)
Dec 16 13:41:58 madalina ppp[960]: LCP: deflink: RecvConfigRej(14) state
= Req-Sent
Dec 16 13:41:58 madalina ppp[960]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)
Dec 16 13:41:58 madalina ppp[960]: LCP: deflink: SendConfigReq(15) state
= Req-Sent
Dec 16 13:41:58 madalina ppp[960]: LCP: ACFCOMP[2]
Dec 16 13:41:58 madalina ppp[960]: LCP: PROTOCOMP[2]
Dec 16 13:41:58 madalina ppp[960]: LCP: ACCMAP[6] 0x00000000
Dec 16 13:41:58 madalina ppp[960]: LCP: MRU[4] 1500
Dec 16 13:41:58 madalina ppp[960]: LCP: MAGICNUM[6] 0xd8d20f22
Dec 16 13:41:58 madalina ppp[960]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)
Dec 16 13:41:58 madalina ppp[960]: LCP: deflink: RecvConfigRej(15) state
= Req-Sent
Dec 16 13:41:58 madalina ppp[960]: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)
Dec 16 13:41:58 madalina ppp[960]: Phase: deflink: Too many LCP REQs
sent - abandoning negotiation
Dec 16 13:41:58 madalina ppp[960]: LCP: deflink: SendTerminateReq(16)
state = Req-Sent
Dec 16 13:41:58 madalina ppp[960]: LCP: deflink: State change Req-Sent
--> Closing
Dec 16 13:41:58 madalina ppp[960]: LCP: deflink: RecvTerminateAck(16)
state = Closing
Dec 16 13:41:58 madalina ppp[960]: LCP: deflink: LayerFinish
Dec 16 13:41:58 madalina ppp[960]: LCP: deflink: State change Closing
--> Closed
Dec 16 13:41:58 madalina ppp[960]: LCP: deflink: State change Closed -->
Initial
Dec 16 13:41:58 madalina ppp[960]: Phase: deflink: Disconnected!
Dec 16 13:41:58 madalina ppp[960]: Phase: deflink: Connect time: 1 secs:
384 octets in, 937 octets out
Dec 16 13:41:58 madalina ppp[960]: Phase: deflink: 16 packets in, 16
packets out
Dec 16 13:41:58 madalina ppp[960]: Phase: total 1321 bytes/sec, peak 0
bytes/sec on Thu Dec 16 13:41:57 2004
Dec 16 13:41:58 madalina ppp[960]: Phase: deflink: lcp -> closed
Dec 16 13:41:58 madalina ppp[960]: Phase: bundle: Dead
Dec 16 13:41:58 madalina ppp[960]: Phase: PPP Terminated (normal).
Why i get disconnected ??
Thanks,
Cristi
---------------------------------------------------
This message and its contents have been scanned and certified for
transmission as being free from malicious code by <<eTrust Antivirus>>. This
message may contain confidential, privileged or other legally protected
information. It is intended for the addressee(s) only. If you are not the
addressee, or someone the addressee authorized to receive this message, you
are prohibited from copying, distributing or otherwise using it. Please
notify the sender and return it.Thank you.
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
