I have a scsi controller:
iir0: <Intel Integratd RAID Controller> mem 0xfc2f0000-0xfc2f3fff irq 20 at device 8.0 on pci4
Yestarday I have taken this messages from my dmesg output:
iir0: SCSI-B, ID 0: last status 0x00000107. I/O status: SELECTION_TIMEOUT
iir0: SCSI-B, ID 0: Check cables, termination, termpower, LVDS operation, etc.
iir0: Array Drive 0: Logical Drive 0 <SCSI-B, ID 0, LUN 0> failed
iir0: Array Drive 0: FAIL state entered
iir0: SCSI-B, ID 0: Auto Hot Plug started for slot 0
iir0: SCSI-B, ID 0: MPI returned 0x00000043
iir0: Bus B: The SCSI controller successfully recovered from a SCSI BUS issue. The issue may still be present on the BUS. Check cables, termination, termpower, LVDS operation, etc
iir0: SCSI-B, ID 0: MPI returned 0x00000048
I want to be sure that if I have understood right. It seems that Driver0 has failed. But I want to be sure that that is correct. How can I verift that Driver0 has the problem.
-----------------------
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
********************************************************
First Turkish FreeBSD book is out! Go check it.
Duydunuz mu! Turkiye'nin ilk FreeBSD kitabi cikti.
http://www.acikkod.com/freebsd.php
_______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
