On Tue, 2005-02-15 at 09:45, Lowell Gilbert wrote: > Mike Jeays <[EMAIL PROTECTED]> writes: > > > I have at present two emulated SCSI devices on my system; a USB flash > > drive, and a DVD-writer. > > > > They get assigned: > > > > 0,0,0 0) 'SanDisk ' 'Cruzer Micro ' '2033' Removable Disk > > 2,0,0 200) 'HL-DT-ST' 'DVDRAM GSA-4160B' 'A300' Removable CD-ROM > > > > if the USB device is present at boot time (I think). > > > > So my script for burning CDs, which says: > > mkisofs -J -L -R -o x1.iso "$*" > > cdrecord -v dev=2,0,0 x1.iso > > rm -f x1.iso > > is very fragile. > > > > How should I do it? Write a script to read the output of cdrecord > > -scanbus and grab the device number? There has to be a "right" way, and > > instinct says this isn't it. > > It's not a bad way. > > I'm not sure I understand why the device numbering is so fragile, > though; wouldn't the ATAPI buses available at boot time be the same > whether they have devices or not?
I don't understand either, but it happens. I rebooted with the flash drive not plugged in, and the DVD burner is now dev=1,0,0. Then I inserted the flash drive, and it was assigned dev=2,0,0. A second flash drive got 3,0,0 - which seems reasonable. So I wrote a tiny Perl script to find the unit number, and call it before running cdrecord. It works OK, but it still seems like a kludge to me. Thanks for the help. _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
