Hmm. I'm unable to reproduce the error in any of my testing scenarios. I apologize for not being to help further. As kib advised, if you can please post a verbose dmesg from a successful boot along with where you believe the panic occurs on a bad boot.
Gordon On Thu, Jun 21, 2018 at 5:13 AM, Denis Polygalov <[email protected]> wrote: > Seems like I did not cc my reply to the mailing list. > Doing it now because I found a hint which may > lead to the cause of the reboot loop. > > Removing: > > linux_load="YES" > linprocfs_load="YES" > linsysfs_load="YES" > > prevent the reboot loop in multi-user mode but > leave me without Linux emulation... > > Regards, > Denis. > >> Hi Gordon, >> >> this is real hardware. I found the reason (see below). >> Setting hw.lazy_fpu_switch=1 in /boot/loader.conf makes no difference. >> No panic messages. >> I can tell you when it happen. Here is the boot messages: >> ... skipped ... >> Timecounters tick every 1.000 msec >> nvme cam probe device init >> ugen2.1: <Intel EHCI root HUB> at usbus2 >> ugen1.1: <Intel UHCI root HUB> at usbus1 >> ugen0.1: <Intel UHCI root HUB> at usbus0 >> uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 >> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 >> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 >> uhub1: 2 ports with 2 removable, self powered >> uhub2: 2 ports with 2 removable, self powered >> uhub0: 4 ports with 4 removable, self powered >> >> <---- here screen (local monitor) goes black and machine restarted. >> >> ada0 at ata2 bus 0 scbus8 target 0 lun 0 >> ada0: <WDC WD2000FYYZ-01UL1B1 01.01K02> ATA8-ACS SATA 3.x device >> ada0: Serial Number WD-WMC1P0D1KEHJ >> ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) >> ada0: 1907729MB (3907029168 512 byte sectors) >> da0 at ciss0 bus 0 scbus0 target 0 lun 0 >> da0: <HP RAID 5 OK> Fixed Direct Access SCSI device >> da0: 135.168MB/s transfers >> da0: Command Queueing enabled >> da0: 858293MB (1757784604 512 byte sectors) >> Trying to mount root from ufs:/dev/da0s1a [rw]... >> >> I noticed that I can boot the *patched* kernel in single user mode. >> Removing these 3 lines from the /boot/loader.conf fixed rebooting loop >> problem: >> >> linux_load="YES" >> linprocfs_load="YES" >> linsysfs_load="YES" >> >> This machine is used as a test bench to test stuff >> before deploying on a production server. >> We need Linux emulation support on the production >> server to run closed source software... >> So... maybe this will help someone. >> >> Blaming evil penguins, >> Denis > > > > > On 21/06/2018 4:19 PM, Gordon Tetlow wrote: >> >> On Wed, Jun 20, 2018 at 11:14 PM, Denis Polygalov <[email protected]> >> wrote: >>> >>> What I did is following: >>> >>> # uname -a >>> FreeBSD my_host_name 11.1-RELEASE-p10 FreeBSD 11.1-RELEASE-p10 #0: Tue >>> May 8 05:21:56 UTC 2018 >>> [email protected]:/usr/obj/usr/src/sys/GENERIC amd64 >>> >>> # freebsd-update fetch >>> Looking up update.FreeBSD.org mirrors... 3 mirrors found. >>> Fetching metadata signature for 11.1-RELEASE from update6.freebsd.org... >>> done. >>> Fetching metadata index... done. >>> Inspecting system... done. >>> Preparing to download files... done. >>> >>> The following files will be updated as part of updating to >>> 11.1-RELEASE-p11: >>> /boot/kernel/kernel >>> >>> Installing this update cause endless reboot loop. >>> >>> # cat /boot/loader.conf >>> kern.maxfiles="32768" >>> zfs_load="YES" >>> linux_load="YES" >>> linprocfs_load="YES" >>> linsysfs_load="YES" >>> >>> # dmesg |grep CPU >>> CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3400.19-MHz K8-class CPU) >>> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >>> SMP: AP CPU #1 Launched! >>> SMP: AP CPU #3 Launched! >>> SMP: AP CPU #2 Launched! >>> cpu0: <ACPI CPU> on acpi0 >>> cpu1: <ACPI CPU> on acpi0 >>> cpu2: <ACPI CPU> on acpi0 >>> cpu3: <ACPI CPU> on acpi0 >>> acpi_perf0: <ACPI CPU Frequency Control> on cpu0 >>> est: CPU supports Enhanced Speedstep, but is not recognized. >>> est: CPU supports Enhanced Speedstep, but is not recognized. >>> est: CPU supports Enhanced Speedstep, but is not recognized. >>> >>> The machine is HP ProLiant ML350 >> >> >> Sorry to hear you are having a problem. >> >> Just to confirm, this is running on hardware and not on a Xen >> hypervisor, correct? >> >> Assuming it's running directly on the hardware, can you see if setting: >> hw.lazy_fpu_switch=1 >> in /boot/loader.conf makes any difference? >> >> Is there any panic message? >> >> Thanks, >> Gordon >> > _______________________________________________ > [email protected] mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-security > To unsubscribe, send any mail to "[email protected]" _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-security To unsubscribe, send any mail to "[email protected]"
