> May be, I miss the point. Why do you want to disable > dma on the cf card, when you can instruct FreeBSD > to just not use dma (atacontrol(8)) ?
Because newer CF cards, like the SanDisk, negotiate DMA with the controller. However, most of the IDE <-> CF Adapters aren't properly wired for this, as they only implement CF 1.5 and not CF 2.0. So, when FreeBSD goes to access the device, you get all kinds of timeout errors. If you are lucky, ata will failback to PIO mode. Most of the time it has bitten me, I've not been lucky :-(. hw.ata.ata_dma=0 is the magic. You can set it at the boot loader prompt, or you can add it to /boot/loader.conf. atacontrol is way too late, since this disabling must be done prior to geom's scan for root (or the moral equivalent in 4.x). Warner _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-small To unsubscribe, send any mail to "[EMAIL PROTECTED]"
