On Wed, 11 Feb 2009, Jack Vogel wrote:
Somehow that error was corrected but just AFTER the release. Its a
simple fix, look at ixgbe.h in CVS to see it, you just get rid of the
"tcp_lro.h" and change it to <netinet/tcp_lro.h>
There will be a new code drop soon also.
That worked perfectly. Now I see:
pci23: <ACPI PCI bus> on pcib11
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 1.6.2> port
0x6000-0x601f mem 0xfdfe0000-0xfdffffff,0xfdf80000-0xfdfbffff,0xfdf70000-0xfdf73fff
irq 19 at device 0.0 on pci23
ix0: Using MSIX interrupts with 3 vectors
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: Ethernet address: 00:1b:21:11:70:8f
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 1.6.2> port
0x6020-0x603f mem 0xfdf40000-0xfdf5ffff,0xfdf00000-0xfdf3ffff,0xfdef0000-0xfdef3fff
irq 16 at device 0.1 on pci23
ix1: Using MSIX interrupts with 3 vectors
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: Ethernet address: 00:1b:21:11:70:8e
and
i...@pci0:23:0:0: class=0x020000 card=0xa15f8086 chip=0x10c68086 rev=0x01
hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
i...@pci0:23:0:1: class=0x020000 card=0xa15f8086 chip=0x10c68086 rev=0x01
hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
and
ix0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=13b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4>
ether 00:1b:21:11:70:8f
media: Ethernet autoselect
status: no carrier
ix1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=13b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4>
ether 00:1b:21:11:70:8e
media: Ethernet autoselect
status: no carrier
Thanks!
--
Greg Rivers
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[email protected]"
