On Sun, Mar 08, 2009 at 08:41:45PM -1000, Clifton Royston wrote: > On Mon, Mar 09, 2009 at 03:03:46PM +0900, Pyun YongHyeon wrote: > ... > > Thanks a lot! This is the report I had been waiting for. I've > > committed the patch to HEAD(r189555). > > As long as you're thinking about the re/rl driver, I have been > meaning to report to you that the patch you've posted for 6-STABLE > has been working fine on 6.4-RELEASE with a Gigabyte motherboard using > an onboard RTL8168 Gigabit Ethernet chip. > > It was unidentified with 6.4-RELEASE, but after I applied the patches > I found described at > http://people.freebsd.org/~yongari/re/6.x/README > and rebuilt the kernel, it was detected and worked properly. (I don't > have a Gigabit switch, so I'm only running at 100baseTX at present.) >
Thanks for reporting/testing! Unfortunately I don't have 6.x box anymore so it's somewhat hard to maintain re(4)/rl(4) for 6-stable. The files in 6.x directory were posted when an user eagerly wanted to use his unrecognized controller at that time. > -- Clifton > > uname -v: > FreeBSD 6.4-RELEASE #0: Thu Mar 5 21:32:53 HST 2009 > [email protected]:/var/tmp/usr.obj/usr/src/sys/SMP > > dmesg output: > ... > re0: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit > Ethernet> > port 0xd000-0xd0ff mem 0xe1110000-0xe1110fff,0xe1100000-0xe110ffff irq 17 at > dev ice 0.0 on pci2 > re0: Chip rev. 0x3c000000 > re0: MAC rev. 0x00400000 > miibus0: <MII bus> on re0 > rgephy0: <RTL8169S/8110S/8211B media interface> on miibus0 > rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > > pciconf -lv output: > ... > r...@pci2:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x02 > hdr=0x00 > vendor = 'Realtek Semiconductor' > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' > class = network > subclass = ethernet > > ifconfig output: > re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> > inet x.y.z.w ... > inet x.y.z.v ... > ether 00:1f:d0:cd:3c:9c > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
