On Monday 16 March 2009 8:08:26 am pluknet wrote: > 2009/3/16 pluknet <[email protected]>: > > Hi. > > > > I got this on today's RELENG_6 with Broadcom BCM5722 A0, ASIC rev. 0xa200. > > > > From dmesg (bge related): > > > > bge0: <Broadcom BCM5722 A0, ASIC rev. 0xa200> mem > > 0xe8400000-0xe840ffff irq 16 at device 0.0 on pci2 > > bge0: firmware handshake timed out, found 0x4b657654 > > bge0: firmware handshake timed out, found 0x4b657654 > > bge0: EEPROM read timed out > > bge0: failed to read EEPROM > > device_attach: bge0 attach returned 6 > > bge1: <Broadcom BCM5703 B0, ASIC rev. 0x1100> mem > > 0xe8600000-0xe860ffff irq 21 at device 1.0 on pci3 > > miibus0: <MII bus> on bge1 > > brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 > > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > > 1000baseT-FDX, auto > > bge1: Ethernet address: 00:21:5e:4d:05:c8 > > > > > > any hints? > > > > P.S. I see EEPROM timeout fixes were already merged to RELENG_6 (I > > have post-fix version certainly). > > May that issue be somehow related? > > > > I guess it's a regression. Below are my speculations. > > I tried to build on 6.2-R the bge(4) sources checked from later RELENG_6 > just after BCM5722 support (from if_bgereg.h 1.36.2.11/ if_bge.c1.91.2.26) > in order to backport BCM5722 support into 6.2-R. After some tweaks it > was built, so..
Can you further narrow down where the regression occurs? -- John Baldwin _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
