hi all
Per Otterström wrote:
Hi all.
I'm running 7.1-RELEASE.
When I plug in my D-Link DGE-660TD gigabit cardbus adapter I get:
re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet>
port
0x4000-0x40ff mem 0xd0201000-0xd02011ff irq 11 at device 0.0 on cardbus1
re0: Chip rev. 0x10000000
re0: MAC rev. 0x00000000
re0: PHY write failed
re0: PHY write failed
re0: PHY read failed
re0: MII without any phy!
device_attach: re0 attach returned 6
Relevant part from pciconf -lv:
r...@pci0:6:0:0: class=0x020000 card=0x43011186 chip=0x816910ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8110SB Single-Chip Gigabit LOM Ethernet Controller'
class = network
subclass = ethernet
I've seen several patches for similar problems provided by Pyun
YongHyeon,
but I don't think any one of them are applicable in my case.
Any advice appreciated.
regards, Pelle
i got same error on my 7.1 i386
dmesg output with hw.cardbus.debug="1" and hw.cardbus.cis_debug="1" is
here -
http://pastebin.com/m63175351
i am ready to give shell access if anyone need it
wbr
Andrei
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[email protected]"
