On Wed, 01-Jul-2009 at 13:28:57 -0700, Sam Leffler wrote:
> Andre Albsmeier wrote:
> > Today I wanted to build net/iwi-firmware on 7.2-STABLE and I got
> >
> > ===> iwi-firmware-2.4_8 is configured with iwicontrol(8) which you don't
> > need, use 'make rmconfig' and uncheck CONTROL.
> >
> > While the firmware itself is in the base system, iwicontrol(8)
> > is not. The port should be modified to cope with this but I
> > have no idea in what way. Some ideas:
> >
> > 1. Remove the build restrictions
> > 2. Just build iwicontrol on systems where the fw is not needed
> > 3. Make an extra port just to build iwicontrol
> > 4. ???
> >
> > Any suggestions? Thanks,
>
> man iwi; the firmware is automatically loaded by the driver
Yes, I know. I don't want to load the firmware, I want to
query the state of the hardware switch which enables the
transmitter (iwicontrol iwi0 -r).
Thanks,
-Andre
--
Never argue with an idiot. They drag you down to
their level, then beat you with their experience.
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
