On Sunday 06 September 2009 11:51:54 am Luigi Rizzo wrote: > [Note 3] the TSC frequency is computed reading the tsc around a > call to DELAY(1000000) and assuming that the i8254 runs > at the nominal rate, 1.193182 MHz. > From tests I have made, the measurement in init_TSC() returns > a large error when HZ is large, whereas repeating the measurement > at a later time returns a much more reliable value. > As an example, see the following: > > Sep 6 14:21:59 lr kernel: TSC clock: at init_TSC 2323045616 Hz > Sep 6 14:21:59 lr kernel: Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Sep 6 14:21:59 lr kernel: AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> > Sep 6 14:21:59 lr kernel: TSC: P-state invariant > Sep 6 14:21:59 lr kernel: TSC clock: at cpu_startup_end 2323056910 Hz > Sep 6 14:21:59 lr kernel: TSC clock: at acpi_timer_probe 2311254060 Hz > Sep 6 14:21:59 lr kernel: TSC clock: at acpi_timer_probe_2 2311191310 Hz > Sep 6 14:21:59 lr kernel: TSC clock: at pn_probe_start 2300822648 Hz > Sep 6 14:21:59 lr kernel: TSC clock: at pn_attach_start 2300830946 Hz > Sep 6 14:21:59 lr kernel: TSC clock: at pn_probe_start 2300840133 Hz > Sep 6 14:21:59 lr kernel: TSC clock: at pn_attach_start 2300835253 Hz > Sep 6 14:21:59 lr kernel: TSC clock: at lapic_setup_clock 2300868376 Hz > > The latter values are close to what is reported when HZ=1000.
Try disabling legacy USB support in the BIOS to see if an SMI# is firing during the DELAY() causing the TSC freq to be too high. I have seen the USB legacy support cause this in other machines. -- John Baldwin _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"