On Thu, Nov 19, 2009 at 12:11:26AM -0600, Adam Vande More wrote: > > > > I don't know. I'm waiting for someone to actually write documentation > > on this. I keep seeing commits talking about ATA disks via CAM (e.g. > > SCSI emulation for ATA disks), but the only thing I'm aware of that > > exists is SCSI emulation for ATAPI devices. > > > > > I've just tried "Modular ATA" configuration of Intel ICH7-based system > > plus "device ahci" > > > minus all traditional ata(4) kernel configuration, the kernel builds fine > > > but boot messages do not show any attempt to detect my SATA HDD, > > > so root mount just fails (I use GEOM UFS labels in my /etc/fstab). > > > Typing ? at "mounroot" prompt I see only daX devices standing for my USB > > cardreader > > > and no device for HDD. > > > > This sounds like a different problem. You may want to talk to mav@ > > about this. > > > > > It seems I miss ada(4) device and I cannot find it in 8.0 - not ada.ko > > nor "device ada". > > > > Same. > > > > To enable ahci, put ahci_load="YES" into loader.conf. Upon reboot, drives > will be detected as adaX eg > > galacticdominator% dmesg |grep ada > GEOM_STRIPE: Disk ada3 attached to stripe0. > GEOM_STRIPE: Disk ada4 attached to stripe0. > [email protected]:/usr/obj/usr/src/sys/GENERIC amd64 > ada0 at ahcich0 bus 0 target 0 lun 0 > ada0: <ST31000528AS CC37> ATA/ATAPI-8 SATA 2.x device > ada0: 300.000MB/s transfers > ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) > ada0: Native Command Queueing enabled > ada1 at ahcich1 bus 0 target 0 lun 0 > ada1: <ST3750330AS SD15> ATA/ATAPI-8 SATA 2.x device > ada1: 300.000MB/s transfers > ada1: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) > ada1: Native Command Queueing enabled > ada2 at ahcich3 bus 0 target 0 lun 0 > ada2: <ST3500320AS AD14> ATA/ATAPI-8 SATA 2.x device > ada2: 300.000MB/s transfers > ada2: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) > ada2: Native Command Queueing enabled > ada3 at ahcich4 bus 0 target 0 lun 0 > ada3: <ST3500320AS AD14> ATA/ATAPI-8 SATA 2.x device > ada3: 300.000MB/s transfers > ada3: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) > ada3: Native Command Queueing enabled > ada4 at ahcich5 bus 0 target 0 lun 0 > ada4: <ST3750330AS SD15> ATA/ATAPI-8 SATA 2.x device > ada4: 300.000MB/s transfers > ada4: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) > ada4: Native Command Queueing enabled > > BIOS must be set to ahci controller mode, and obviously both disk and > controller must support it. This works fine off a GENERIC.
AHCI in the BIOS is enabled, AHCI in FreeBSD is in use. Kernel configuration is below my .sig, ditto with dmesg. World sources are from ~45 minutes prior to kernel build date (2009/11/17 20:07 PST). FreeBSD icarus.home.lan 8.0-PRERELEASE FreeBSD 8.0-PRERELEASE #0: Tue Nov 17 20:07:21 PST 2009 [email protected]:/usr/obj/usr/src/sys/X7SBA_RELENG_8_amd64 amd64 Like I said, this whole thing needs to get documented. -- | Jeremy Chadwick [email protected] | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | # # Kernel configuration for the following system: # # OS: RELENG_8 # MB: Supermicro X7SBA # arch: amd64 # cpu HAMMER ident GENERIC makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty) options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options P1003_1B_SEMAPHORES # POSIX-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options KBD_INSTALL_CDEV # install a CDEV entry in /dev options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) options AUDIT # Security event auditing options MAC # TrustedBSD MAC Framework options FLOWTABLE # per-cpu routing cache #options KDTRACE_FRAME # Ensure frames are compiled in #options KDTRACE_HOOKS # Kernel DTrace hooks # Make an SMP-capable kernel by default options SMP # Symmetric MultiProcessor Kernel # Debugging options options BREAK_TO_DEBUGGER # Sending a serial BREAK drops to DDB options KDB # Enable kernel debugger support options KDB_TRACE # Print stack trace automatically on panic options DDB # Support DDB options GDB # Support remote GDB # CPU frequency control device cpufreq # Bus support. device acpi device pci # Floppy drives device fdc # ATA and ATAPI devices # NOTE: "device ata" is missing because we use the Modular ATA core # to only include the ATA-related drivers we need (e.g. AHCI). device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID # Static device numbering # Modular ATA device atacore # Core ATA functionality device ataisa # ISA bus support device atapci # PCI bus support; only generic chipset support device ataahci # AHCI SATA device ataintel # Intel # SCSI peripherals device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc device agp # support several AGP chipsets # Serial (COM) ports device uart # Generic UART driver # PCI Ethernet NICs. device em # Intel PRO/1000 Gigabit Ethernet Family # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device pty # BSD-style compatibility pseudo ttys device md # Memory "disks" device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse # Intel Core/Core2Duo CPU temperature monitoring driver device coretemp # SMBus support, needed for bsdhwmon device smbus device smb device ichsmb # pf ALTQ support options ALTQ options ALTQ_CBQ # Class Bases Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required for SMP build Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-PRERELEASE #0: Tue Nov 17 20:07:21 PST 2009 [email protected]:/usr/obj/usr/src/sys/X7SBA_RELENG_8_amd64 amd64 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (2992.52-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4294967296 (4096 MB) avail memory = 4112576512 (3922 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 acpi0: <PTLTD XSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0 uhci0: [ITHREAD] usbus0: <Intel 82801I (ICH9) USB controller> on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 17 at device 26.1 on pci0 uhci1: [ITHREAD] usbus1: <Intel 82801I (ICH9) USB controller> on uhci1 uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 18 at device 26.2 on pci0 uhci2: [ITHREAD] usbus2: <Intel 82801I (ICH9) USB controller> on uhci2 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdc000000-0xdc0003ff irq 18 at device 26.7 on pci0 ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci5: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci13: <ACPI PCI bus> on pcib4 em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2000-0x201f mem 0xdc200000-0xdc21ffff irq 16 at device 0.0 on pci13 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:30:48:d2:22:d0 pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci15: <ACPI PCI bus> on pcib5 em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x3000-0x301f mem 0xdc300000-0xdc31ffff irq 17 at device 0.0 on pci15 em1: Using MSI interrupt em1: [FILTER] em1: Ethernet address: 00:30:48:d2:22:d1 uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 23 at device 29.0 on pci0 uhci3: [ITHREAD] usbus4: <Intel 82801I (ICH9) USB controller> on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 22 at device 29.1 on pci0 uhci4: [ITHREAD] usbus5: <Intel 82801I (ICH9) USB controller> on uhci4 uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 18 at device 29.2 on pci0 uhci5: [ITHREAD] usbus6: <Intel 82801I (ICH9) USB controller> on uhci5 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdc000400-0xdc0007ff irq 23 at device 29.7 on pci0 ehci1: [ITHREAD] usbus7: EHCI version 1.0 usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci17: <ACPI PCI bus> on pcib6 vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0xde000000-0xdfffffff,0xdc400000-0xdc43ffff at device 4.0 on pci17 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH9 SATA300 controller> port 0x1c50-0x1c57,0x1c44-0x1c47,0x1c48-0x1c4f,0x1c40-0x1c43,0x18e0-0x18ff mem 0xdc000800-0xdc000fff irq 17 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI called from vendor specific driver atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: [ITHREAD] ata6: <ATA channel 4> on atapci0 ata6: [ITHREAD] ata7: <ATA channel 5> on atapci0 ata7: [ITHREAD] ichsmb0: <SMBus controller> port 0x1100-0x111f mem 0xdc001000-0xdc0010ff irq 17 at device 31.3 on pci0 ichsmb0: [ITHREAD] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 pci0: <dasp> at device 31.6 (no driver attached) acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 cpu0: <ACPI CPU> on acpi0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ad8: 190782MB <WDC WD2000JD-00HBB0 08.02D08> at ata4-master SATA150 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 ad10: 953869MB <WDC WD1001FALS-00J7B1 05.00K05> at ata5-master SATA300 ad14: 953869MB <WDC WD1001FALS-00J7B1 05.00K05> at ata7-master SATA300 SMP: AP CPU #1 Launched! uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered Root mount waiting for: usbus7 usbus3 Root mount waiting for: usbus7 usbus3 uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/ad8s1a ZFS filesystem version 13 ZFS storage pool version 13 em0: link state changed to UP _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
