On Friday 08 January 2010 08:47:54 pm Frank wrote: > On Fri, 8 Jan 2010, Steven Friedrich wrote: > >> Option "AllowEmptyInput" "off" > >> EndSection > > > > Comment out the line containing AllowEmptyInput. > > OK, this took care of the nothing-works-unless-mouse-is-moved problem but > why do I get this? It's keeping apcupsd from starting. > > Ace /usr/ports # usbdevs -d -v > usbdevs: no USB controllers found > > Ace /usr/ports # usbconfig > ugen0.1: <OHCI root HUB nVidia> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) > pwr=ON > ugen1.1: <EHCI root HUB nVidia> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) > pwr=ON ugen0.2: <Back-UPS XS 1200 FW:8.g1 .D USB FW:g1 American Power > Conversion> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > ugen0.3: <USB Optical Mouse vendor 0x0461> at usbus0, cfg=0 md=HOST > spd=LOW (1.5Mbps) pwr=ON > ugen0.4: <Dell USB Keyboard Dell> at usbus0, cfg=0 md=HOST spd=LOW > (1.5Mbps) pwr=ON > > >From dmesg: > > usbus0: <OHCI (generic) USB controller> on ohci0 > usbus1: EHCI version 1.0 > usbus1: <EHCI (generic) USB 2.0 controller> on ehci0 > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 480Mbps High Speed USB v2.0 > ugen0.1: <nVidia> at usbus0 > uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > ugen1.1: <nVidia> at usbus1 > uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 > Root mount waiting for: usbus1 > Root mount waiting for: usbus1 > ugen0.2: <American Power Conversion> at usbus0 > ugen0.3: <vendor 0x0461> at usbus0 > ums0: <vendor 0x0461 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 3> > on usbus0 ugen0.4: <Dell> at usbus0 > ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 4> on usbus0 > > I don't understand why usbdevs can't find any controllers and apcupsd > can't find any device while the kernel and usbconfig can find it all. > > Thanks. > -- > Frank > _______________________________________________ > [email protected] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "[email protected]" > OK, first a disclaimer. I am not a FreeBSD developer, but I have been admin'ing my own *nix systems for decades.
I think this is weird: ugen0.2: <American Power Conversion> at usbus0 What device or port was this on previous to 8-Stable? Is it connected via serial cable (rs232) or USB? I'm betting USB and I'm thinking that maybe the driver you used to use hasn't been converted to the new USB system in 8-Stable. _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
