Hi Pyun,
On Fri, Feb 19, 2010 at 01:12:01PM -0800, Pyun YongHyeon wrote:
> Since I don't have BCM5704 hardware it's hard to find which
> revision may affect to this issue. Could you narrow down which
> revision number started showing the issue?
I have BCM5704 hardware (Tyan S2882 system board). I am seeing kernel
panics very similar to those described in this thread on this
hardware. pciconf -lcv output below. If you'd like access to this
hardware I can arrange it; please contact me off list.
Erik
b...@pci0:2:9:0: class=0x020000 card=0x164414e4 chip=0x164814e4 rev=0x03
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme Dual Gigabit Adapter (BCM5704)'
class = network
subclass = ethernet
cap 07[40] = PCI-X 64-bit supports 133MHz, 2048 burst read, 1 split
transaction
cap 01[48] = powerspec 2 supports D0 D3 current D0
cap 03[50] = VPD
cap 05[58] = MSI supports 8 messages, 64 bit
b...@pci0:2:9:1: class=0x020000 card=0x164414e4 chip=0x164814e4 rev=0x03
hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme Dual Gigabit Adapter (BCM5704)'
class = network
subclass = ethernet
cap 07[40] = PCI-X 64-bit supports 133MHz, 2048 burst read, 1 split
transaction
cap 01[48] = powerspec 2 supports D0 D3 current D0
cap 03[50] = VPD
cap 05[58] = MSI supports 8 messages, 64 bit
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[email protected]"
