I put in a new 4801 RELENG_8 image at a remote site that requires the
NIC set to 10baseT full duplex, manually set. However, when I do
that, I am not sure what to make of the output.
0[to]# ifconfig sis0 media 10baseT/UTP mediaopt full-duplex
0[to]# ifconfig sis0
sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:00:24:d8:aa:e0
inet 192.168.123.210 netmask 0xfffffff8 broadcast 192.168.123.215
media: Ethernet 10baseT/UTP <full-duplex> (10baseT/UTP <half-duplex>)
status: active
0[to]#
What does the half-duplex portion mean ?
I am seeing errors as well in netstat
Name Mtu Network Address Ipkts Ierrs
Idrop Opkts Oerrs Coll
sis0 1500
<Link#1> 00:00:24:d8:aa:e0 281215 0 0 269930 2560 10478
---Mike
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, [email protected]
Providing Internet since 1994 www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[email protected]"
