technews wrote: > So I've started using gmirror recently to mirror 2 1.5 TB drives however > if I reboot the machine or 'gmirror stop -f data1' while the array is > been rebuilt I get the panic below. > Rebooting without geom_mirror loaded does not cause a panic > Rebooting with geom_mirror loaded and the drives disconnected does not > cause a panic. > The drives are in an "Rosewill RSV-S4-X 4 Bay SATA to eSATA (Port > Multiplier) JBOD / RAID 0, 1, 1+0, 5 Enclosure" connected over a SiI > 3726 (rev=1706) adapter > Rebooting with the drives mounted normally does not cause a panic > I'm using the latest and greatest firmware, the panics occurred before > the update
It would be nice if you build kernel with debugger and got a stack backtrace to show where problem occurred. Also, if you like your port multiplier to work much faster and stable - I would strongly suggest you to update to 8-STABLE (or wait forthcoming 8.1-RELEASE, if you prefer releases) and use new siis(4) driver for your SiI3132 SATA controller. Port Multiplier support in ata(4) driver left in embryo level and won't be improved. -- Alexander Motin _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
