Hi
I'm having reproducible panics with 8-Stable of May13 2010. Panic occurs in igb
code. Panic start to happen when i set hw.igb.rxd="4096" and hw.igb.txd="4096"
in /boot/loader.conf. Panic happens immediately after boot in igb1 code in my
case. igb1 is connected to 100Mbit 3COM switch and switch is not connected to
anything else.
Here is dmesg for igb
# dmesg | grep igb
igb0: <Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0x2020-0x203f
mem 0xb1a20000-0xb1a3ffff,0xb1a44000-0xb1a47fff irq 40 at device 0.0 on pci1
igb0: Using MSIX interrupts with 5 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 00:15:17:ba:2e:00
igb1: <Intel(R) PRO/1000 Network Connection version - 1.9.5> port 0x2000-0x201f
mem 0xb1a00000-0xb1a1ffff,0xb1a40000-0xb1a43fff irq 28 at device 0.1 on pci1
igb1: Using MSIX interrupts with 5 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 00:15:17:ba:2e:01
igb1: link state changed to UP
igb0: link state changed to UP
border2# ifconfig
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=13b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4>
ether 00:15:17:ba:2e:00
inet 192.168.10.2 netmask 0xffffff00 broadcast 192.168.10.255
inet 192.168.10.201 netmask 0xffffffff broadcast 192.168.10.201
inet 192.168.10.202 netmask 0xffffffff broadcast 192.168.10.202
inet 192.168.10.203 netmask 0xffffffff broadcast 192.168.10.203
inet 192.168.10.204 netmask 0xffffffff broadcast 192.168.10.204
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
igb1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=13b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4>
ether 00:15:17:ba:2e:01
inet XXX.74.229.230 netmask 0xfffffff0 broadcast XXX.74.229.239
inet XXX.74.229.226 netmask 0xffffffff broadcast XXX.74.229.226
inet XXX.74.229.227 netmask 0xffffffff broadcast XXX.74.229.227
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet 127.0.0.1 netmask 0xff000000
pfsync0: flags=0<> metric 0 mtu 1460
syncpeer: 224.0.0.240 maxupd: 128
pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152
#pciconf -lv
i...@pci0:1:0:0: class=0x020000 card=0x34de8086 chip=0x10a78086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82575EB Gigabit Network Connection'
class = network
subclass = ethernet
i...@pci0:1:0:1: class=0x020000 card=0x34de8086 chip=0x10a78086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82575EB Gigabit Network Connection'
class = network
subclass = ethernet
# netstat -i
Name Mtu Network Address Ipkts Ierrs Idrop Opkts Oerrs
Coll
igb0 1500 <Link#1> 00:15:17:ba:2e:00 2315 0 0 1415 0
0
igb0 1500 192.168.10.0 border2 1664 - - 1412 -
-
igb0 1500 192.168.10.20 mysql-border2 0 - - 0 -
-
igb0 1500 192.168.10.20 apache-border2 0 - - 0 -
-
igb0 1500 192.168.10.20 squid-border2 0 - - 0 -
-
igb0 1500 192.168.10.20 postgresql-border 1 - - 0 -
-
igb1 1500 <Link#2> 00:15:17:ba:2e:01 129 0 0 0 0
0
igb1 1500 XXX.74.229.22 border2 0 - - 0 -
-
igb1 1500 XXX.74.229.22 apache-border2 0 - - 0 -
-
igb1 1500 XXX.74.229.22 squid-border2 0 - - 0 -
-
lo0 16384 <Link#3> 1 0 0 1 0
0
lo0 16384 your-net localhost 0 - - 1 -
-
pfsyn 1460 <Link#4> 0 0 0 0 0
0
pflog 33152 <Link#5> 0 0 0 0 0
0
There are several jails on this server.
When i set hw.igb.rxd="2048" and hw.igb.txd="2048" i don't have panic anymore.
The reason i tried to add more buffers than default is because i have NFS
export on this server. But it is on igb0. igb1 is currently doing nothing but
it will soon once the server will be ready for production.
I didn't get core dump because my system is rather old. But i can do it if
needed.
Regards,
Kirill
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[email protected]"
