I followed the very helpful docs at
<https://www.dan.me.uk/blog/2010/02/08/booting-from-zfs-raid056-in-freebsd-8-0-release/>https://www.dan.me.uk/blog/2010/02/08/booting-from-zfs-raid056-in-freebsd-8-0-release/
to get an 8.1R AMD64 install working booting purely off a zfs
mirror! However, one small issue I ran into is with AHCI enabled in the BIOS.
I did the install directly to disks ada0 and ada1 as I loaded AHCI
from the boot DVD's loader prompt. Everything booted up great.
<http://www.tancsa.com/zfs/ahci-boot.txt>http://www.tancsa.com/zfs/ahci-boot.txt
Then, I took out the DVD ROM drive (CD1) that I installed from and
went to reboot. This time, the box would insta reboot just after the
'BTX Loader' text would appear. I then put back the DVD ROM and
rebooted, still the same problem. Then, I went into the BIOS and
forced the DVD to be the first boot device, just like it was at
install time... Everything booted up fine once again.?!?!
Then, I pulled the DVD drive and I rebooted the box and disabled
AHCI in the BIOS and used just regular enhanced mode, and all booted
up just fine.
<http://www.tancsa.com/zfs/ahci-boot.txt>http://www.tancsa.com/zfs/ata-boot.txt
Is there something additionally that needs to be set for ahci to work
in this manner ?
---Mike
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, [email protected]
Providing Internet since 1994 www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[email protected]"
