> On Wed, Sep 01, 2010 at 11:46:30AM -0400, Rick Macklem wrote: > > > > > > I am experiencing similar issues with newnfs: > > > > > > 1) I have two clients that each get around 0.5MiB/s to 2.6MiB/s > > > reading > > > from the NFS4-share on Gbit-Lan > > > > > > 2) Mounting with -t newnfs -o nfsv3 results in no performance gain > > > whatsoever. > > > > > > 3) Mounting with -t nfs results in 58MiB/s ! (Netcat has similar > > > performance) ??? not a hardware/driver issue from my pov > > > > Ok, so it does sound like an issue in the experimental client and > > not NFSv4. For the most part, the read code is the same as > > the regular client, but it hasn't been brought up-to-date > > with recent changes. > > Do you (or will you soon) have some patches I/we could test? I'm > willing to try anything to avoid mounting ten or so subdirectories in > each of my mount points. > > > One thing you could try is building a kernel without SMP enabled > > and see if that helps? (I only have single core hardware, so I won't > > see any SMP races.) If that helps, I can compare the regular vs > > experimental client for smp locking in the read stuff. > > I can try disabling SMP too. Should that really matter, if you're not > even pegging one CPU? The locks shouldn't have *that* much overhead... > > -- Rick C. Petty > Just fyi, I asked folks to run read tests on the clients (over on freebsd-fs), Sofar, I've only gotten one response, but they didn't see the problem you are (they did see a factor of 2 slower, but it is still 50Mbytes/sec). Maybe you can take a look at their email and compare his client with yours? His message is: http://docs.FreeBSD.org/cgi/mid.cgi?01NRSE7GZJEC0022AD
Btw, if anyone who didn't see the posting on freebsd-fs and would like to run a quick test, it would be appreciated. Bascially do both kinds of mount using a FreeBSD8.1 or later client and then read a greater than 100Mbyte file with dd. # mount -t nfs -o nfsv3 <server>:/path /<mnt-path> - cd anywhere in mount that has > 100Mbyte file # dd if=<file> of=/dev/null bs=1m # umount /<mnt-path> Then repeat with # mount -t newnfs -o nfsv3 <server>:/path /<mnt-path> and post the results along with the client machine's info (machine arch/# of cores/memory/net interface used for NFS traffic). Thanks in advance to anyone who runs the test, rick _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
