On 11/01/2010 01:42 PM, John Baldwin wrote:
On Monday, November 01, 2010 1:30:35 pm Stephen Clark wrote:
On 11/01/2010 09:54 AM, John Baldwin wrote:
On Monday, November 01, 2010 8:38:15 am Stephen Clark wrote:
On 10/29/2010 05:20 PM, John Baldwin wrote:
On Friday, October 29, 2010 4:20:24 pm Stephen Clark wrote:
rr232x: RocketRAID 232x controller driver v1.02 (Jan 16 2008 04:16:21)
hptrr: HPT RocketRAID controller driver v1.1 (Jan 16 2008 04:16:19)
big snip
lo0: bpf attached
rr232x: no controller detected.
hptrr: no controller detected.
m
Why does FreeBSD think I have a rocket raid controller? This the
generic
kernel.
Is there some way disable this from loading?
The hptrr driver is in GENERIC in 6.x and it always prints out the first
message. You can ignore it.
atapci0:<Intel ICH8M UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x0
<big snip>
The point is to limit atapci0 to only having an ata0 and no ata1, then it will
not register an interrupt handler for IRQ15 and get a constant storm of
interrupts. Can you get a verbose dmesg from the patched kernel if possible
and the pciconf -l lines for atapci0 and atapci1 (the pciconf can be from any
working kernel).
John,
Is the pciconf -lv I posted in my initial message sufficient?
verbose patched kernel:
generic with patch
��SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=000000003f9a0000
SMAP type=03 base=000000003faa0000 len=000000000000e000
SMAP type=04 base=000000003faae000 len=0000000000032000
SMAP type=02 base=000000003fae0000 len=0000000000010000
SMAP type=02 base=000000003faf0000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000ffb00000 len=0000000000500000
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RELEASE-p15 #9: Mon Nov 1 12:38:10 EDT 2010
r...@sclark.netwolvesrd.com:/usr/src/sys/i386/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0bff000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0bff1ac.
MP Configuration Table version 1.4 found at 0xc00fdc90
Table 'FACP' at 0x3faa0290
Table 'APIC' at 0x3faa0390
MADT: Found table at 0x3faa0390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
MADT: Found CPU APIC ID 1 ACPI ID 3: enabled
MADT: Found CPU APIC ID 3 ACPI ID 4: enabled
ACPI APIC Table: <080610 APIC1657>
Calibrating clock(s) ... i8254 clock: 1188442 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1673322970 Hz
CPU: Intel(R) Atom(TM) CPU D510 @ 1.66GHz (1673.32-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106ca Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,>
Features2=0x40e31d<SSE3,RSVD2,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,<b22>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
Logical CPUs per core: 2
real memory = 1068105728 (1018 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000003e86ffff, 1036300288 bytes (253003 pages)
avail memory = 1036201984 (988 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f6100
pnpbios: Entry = f0000:78ba Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 4
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Nov 1 2010 12:37:49)
hptrr: HPT RocketRAID controller driver v1.1 (Nov 1 2010 12:37:46)
npx0: INT 16 interface
acpi0: <080610 XSDT1657> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=a0008086)
pcibios: BIOS version 3.00
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xd8a56000 pa 0x9e000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.SBRG.FHR0 -> bus 0 dev 31 func 0
acpi0: reservation of ffc00000, 300000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 15 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 6 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 6 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0xa000, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0xa001, revid=0x02
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type 1, range 32, base fe980000, size 19, enabled
map[14]: type 4, range 32, base 0000cc00, size 3, enabled
map[18]: type 3, range 32, base d0000000, size 28, enabled
map[1c]: type 1, range 32, base fe800000, size 20, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0xa002, revid=0x02
bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fe780000, size 19, enabled
found-> vendor=0x8086, dev=0x2834, revid=0x03
bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type 4, range 32, base 0000c880, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2835, revid=0x03
bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 0000c800, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x283a, revid=0x03
bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fe977c00, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x283f, revid=0x03
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0104, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2845, revid=0x03
bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2830, revid=0x03
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=6
map[20]: type 4, range 32, base 0000c480, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2831, revid=0x03
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type 4, range 32, base 0000c400, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2832, revid=0x03
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=15
map[20]: type 4, range 32, base 0000c080, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2836, revid=0x03
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=6
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fe977800, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2448, revid=0xf3
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2815, revid=0x03
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2850, revid=0x03
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x8086, dev=0x2828, revid=0x03
bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=15
powerspec 3 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000c000, size 3, enabled
map[14]: type 4, range 32, base 0000bc00, size 2, enabled
map[18]: type 4, range 32, base 0000b880, size 3, enabled
map[1c]: type 4, range 32, base 0000b800, size 2, enabled
map[20]: type 4, range 32, base 0000b480, size 4, enabled
map[24]: type 4, range 32, base 0000b400, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 18
found-> vendor=0x8086, dev=0x283e, revid=0x03
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type 1, range 32, base fe977400, size 8, enabled
map[20]: type 4, range 32, base 00000400, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 17
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 16 at
device 26.00
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc880
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 21 at
device 26.10
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc800
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe977c00-0xfe977fff irq
18 at 0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe977c00
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib1: <ACPI PCI-PCI bridge> irq 22 at device 28.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: memory decode 0x0-0x0
pcib1: prefetched decode 0x0-0x0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.3 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfea00000-0xfeafffff
pcib2: prefetched decode 0xfdf00000-0xfdffffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x10ec, dev=0x8168, revid=0x03
bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 4 messages in map 0x20
map[10]: type 4, range 32, base 0000d800, size 8, enabled
pcib2: requested I/O range 0xd800-0xd8ff: in range
map[18]: type 3, range 64, base fdfff000, size 12, enabled
pcib2: requested memory range 0xfdfff000-0xfdffffff: good
map[20]: type 3, range 64, base fdff8000, size 14, enabled
pcib2: requested memory range 0xfdff8000-0xfdffbfff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 19
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800
pcib2: re0 requested I/O range 0xd800-0xd8ff: in range
pcib2: re0 requested I/O range 0xd800-0xd8ff: in range
pcib2: re0 requested I/O range 0xd800-0xd8ff: in range
pcib2: re0 requested I/O range 0xd800-0xd8ff: in range
pcib2: re0 requested I/O range 0xd800-0xd8ff: in range
pci2: <network, ethernet> at device 0.0 (no driver attached)
uhci2: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 23 at
device 29.00
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc480
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 52
uhci2: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 19 at
device 29.10
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc400
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
uhci3: [GIANT-LOCKED]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xc080-0xc09f irq 18 at
device 29.20
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc080
uhci4: [GIANT-LOCKED]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe977800-0xfe977bff irq
23 at 0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe977800
ehci1: [GIANT-LOCKED]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
umass0: HP v100w, rev 2.00/20.48, addr 2
umass0:0:0:-1: Attached to scbus0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xe000-0xefff
pcib3: memory decode 0xfeb00000-0xfebfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pcib3: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=3, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=15
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e800, size 8, enabled
pcib3: requested I/O range 0xe800-0xe8ff: in range
map[14]: type 1, range 32, base febffc00, size 8, enabled
pcib3: requested memory range 0xfebffc00-0xfebffcff: good
pcib3: matched entry for 3.4.INTA
pcib3: slot 4 INTA hardwired to IRQ 18
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=3, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e400, size 8, enabled
pcib3: requested I/O range 0xe400-0xe4ff: in range
map[14]: type 1, range 32, base febff800, size 8, enabled
pcib3: requested memory range 0xfebff800-0xfebff8ff: good
pcib3: matched entry for 3.6.INTA
pcib3: slot 6 INTA hardwired to IRQ 19
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=3, slot=7, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 8, enabled
pcib3: requested I/O range 0xe000-0xe0ff: in range
map[14]: type 1, range 32, base febff400, size 8, enabled
pcib3: requested memory range 0xfebff400-0xfebff4ff: good
pcib3: matched entry for 3.7.INTA
pcib3: slot 7 INTA hardwired to IRQ 16
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe800
pcib3: rl0 requested I/O range 0xe800-0xe8ff: in range
pcib3: rl0 requested I/O range 0xe800-0xe8ff: in range
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xfebffc00-0xfebffcff i3
pcib3: rl0 requested I/O range 0xe800-0xe8ff: in range
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:30:18:a1:7f:e9
rl0: [MPSAFE]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe400
pcib3: rl1 requested I/O range 0xe400-0xe4ff: in range
pcib3: rl1 requested I/O range 0xe400-0xe4ff: in range
rl1: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem
0xfebff800-0xfebff8ff i3
pcib3: rl1 requested I/O range 0xe400-0xe4ff: in range
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: bpf attached
rl1: Ethernet address: 00:30:18:a1:7f:ea
rl1: [MPSAFE]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe000
pcib3: rl2 requested I/O range 0xe000-0xe0ff: in range
pcib3: rl2 requested I/O range 0xe000-0xe0ff: in range
rl2: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem
0xfebff400-0xfebff4ff i3
pcib3: rl2 requested I/O range 0xe000-0xe0ff: in range
miibus2: <MII bus> on rl2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: bpf attached
rl2: Ethernet address: 00:30:18:a1:7f:eb
rl2: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa00
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0: stat0=0x0c err=0x0c lsb=0x0c msb=0x0c
ata0: stat0=0x0f err=0x0f lsb=0x0f msb=0x0f
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x03 err=0x03 lsb=0x03 msb=0x03
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: stat0=0x0f err=0x0f lsb=0x0f msb=0x0f
ata0: stat1=0x07 err=0x07 lsb=0x07 msb=0x07
ata0: reset tp2 stat0=8f stat1=87 devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55
ata1: [MPSAFE]
atapci1: <Intel ATA controller> port
0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb480
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbc00
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb880
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
ioapic0: Changing trigger for pin 4 to level
ioapic0: Changing polarity for pin 4 to low
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x83ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 83666161 hz
Timecounter "TSC" frequency 1673322970 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
hptrr: no controller detected.
�
--
"They that give up essential liberty to obtain temporary safety,
deserve neither liberty nor safety." (Ben Franklin)
"The course of history shows that as a government grows, liberty
decreases." (Thomas Jefferson)
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
