Hi list!
I moved my 8-STABLE system from cheap AMD64 machine to Proliant DL180G6
(full ZFS send -> receive) yesterday.
Operation was succesfull, system booted and everything worked fine.
Still, I wanted to perform full world + kernel rebuild with updated
sources and CPUTYPE (core2 instead of athlon64) and removed unused NIC
drivers from kernel.
New kernel panicked during boot. I rebuilt kernel again, without any
CPUTYPE in make.conf, but panic was still there. Old kernel (built at
8.04.2011) is booting fine.
First panic line says:
panic: m_getzone: m_getjcl: invalid cluster type.
I made a por quality photo of screen with stack backtrace and it's
available here: http://www.picamatic.com/view/7544359_IMAG0029/
Now the funny thing:
Igb driver is compiled into the kernel. If I add igb driver to
loader.conf kernel complains of course:
module_register: module pci/igb already exists!
Module pci/igb failed to register: 17
but there's no panic!
When I remove 'if_igb_load="YES"' from loader.conf, I experience panic
visible above.
Kernel config: http://pastebin.com/G7K0vfuJ
--
Bartosz Stec
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[email protected]"
