On 24/06/2011, at 6:17, Joe in MPLS wrote: > This was originally posted on the freebsd-questions list. It was suggested > that I post it here: > > I have FreeBSD 8.2-RELEASE running on an HP DL360 G5. I recently added an (HP > branded) LSI Logic single channel SCSI 320 card and attached an HP Ultrium > 920 LTO3 tape drive. > > The system sees the SCSI controller as mpt0, and it seems to know there's > something at SCSI ID 4, but I get an "AutoSense Failed" for hba/id/lun 0:4:0 > at boot and subsequent camcontrol rescans. > > I checked the supported hardware doc for the release but it doesn't get very > specific about tape drives. This is my first experience with LTO3 tape. I was > hoping that I'd automagically get a /dev/sa0 device like I always did with my > old DLT drives but it wasn't to be this time. > > Is there a way to make this drive work?
I'd check the cabling etc.. I have an LTO2 drive that "Just works (tm)". Can you boot a Linux ISO and see if that finds it? -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
