On Sun, 4 Mar 2012 14:39:01 +0800 Irjohn Junus <[email protected]> wrote:
> Hello, > > This was originally posted here: > http://forums.freebsd.org/showthread.php?p=168854&posted=1#post168854 > > I'm building a new PF firewall box based on FreeBSD 9 Release. Motherboard > is Foxconn H61S Mini-ITX with Intel PRO/1000 PT dual port server adapter. > > The adapter is recognized as em0 and em1 but em0 just won't work (i.e no > light on the port when connected to the switch) and em1 works only in > 100baseTX full-duplex mode (no carrier if I force it to 1000baseT). I tried > to change switch port, UTP cable from Cat5e to Cat6 but still no luck. The > onboard Realtek works fine. Switch is Netgear GS608. Could it be a bad > Intel card? > > I also tried to compile the latest driver from Intel but it gives error > during compilation: > http://downloadcenter.intel.com/conf...&Dwnldid=17509<http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/17509/eng/em-7.2.4.tar.gz&lang=eng&Dwnldid=17509> > > Any help will be greatly appreciated. Thanks! > > ps: command captures are provided at the url above. Maybe you should test with 8.3-BETA1. The recent em1000 drivers (7.3.0?) were mfc'ed to stable/8 January 31st but not to stable/9. See: <http://thread.gmane.org/gmane.os.freebsd.devel.net/34946> <http://svnweb.freebsd.org/base?view=revision&revision=230848> -- Herbert _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
