On Tue, Mar 13, 2012 at 02:08:46PM +0100, Jan Winter wrote: > Hello, > > on an Dell Blade m610 is not possible to change the network media option: > > ifconfig bce0 media 100baseTX mediaopt full-duplex up > ifconfig: SIOCSIFMEDIA (media): Device not configured > > Setting the media option to "autoselect" and connecting the m610 to a > 100 MBit switch, I always get "no carrier" > only 1g full-duplex seems to be working. I have tested this on > 8.3-prerelease and 9-stable > > any Ideas? > > cheers > Jan > > pciconf -lv > bce0@pci0:1:0:0: class=0x020000 card=0x02871028 chip=0x163a14e4 > rev=0x20 hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'NetXtreme II BCM5709S Gigabit Ethernet' > class = network > subclass = ethernet > > dmesg > bce0: <Broadcom NetXtreme II BCM5709 1000Base-SX (C0)> mem > 0xda000000-0xdbffffff irq 36 at device 0.0 on pci1 > miibus0: <MII bus> on bce0 > brgphy0: <BCM5709S 1000/2500baseSX PHY> PHY 2 on miibus0 > brgphy0: 1000baseSX-FDX, auto > bce0: Ethernet address: 00:26:b9:fb:04:0c > bce0: ASIC (0x57092000); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.11); > Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.5) > Coal (RX:6,6,18,18; TX:20,20,80,80) > bce1: <Broadcom NetXtreme II BCM5709 1000Base-SX (C0)> mem > 0xdc000000-0xddffffff irq 48 at device 0.1 on pci1 > miibus1: <MII bus> on bce1 > brgphy1: <BCM5709S 1000/2500baseSX PHY> PHY 2 on miibus1 > brgphy1: 1000baseSX-FDX, auto > bce1: Ethernet address: 00:26:b9:fb:04:0e > bce1: ASIC (0x57092000); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.11); > Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.5) > Coal (RX:6,6,18,18; TX:20,20,80,80) >
I'm not sure you're seeing one of long standing remote PHY issue of blade box but would you try the patch at the following URL? http://people.freebsd.org/~yongari/bce/bce.rphy.diff After applying the patch, show me the dmesg output(bce(4) and brgphy(4) related ones) and 'ifconfig -m bce0'. Note, the patch was not tested at all(lack of hardware). _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
