Hi Matheus, You have two options.
Option 1. Resync the in-memory and on-disk view of the world Identify the device from # usbconfig list Then power it off and then power on. If this doesn't work then you'll need to dd the device. For example: # usbconfig list ugen4.2: <DT Mini Slim Kingston> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE # usbconfig -d 4.2 power_off # usbconfig -d 4.2 power_on Option 2. Clear the boot blocks # dd if=/dev/zero of=/dev/da0 bs=1M count=1 If this doesn't help then zero the whole device, omit the bs and count arguments. I'd also suggest that you assign 0xa5 to the device, by # fdisk -p da0 > /tmp/fdisk.cf Use a text editor to change the 0xa6 to 0xa5; then write it back to fdisk # fdisk -f /tmp/fdisk.cf /dev/da0 Of course, the excessive option is to reboot... Regards, Dewayne. PS I think this question would be better placed in the FreeBSD Questions mailing list :) _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
