On 20 jun 2012, at 18:34, Andrey V. Elsukov wrote: > On 20.06.2012 19:14, Ruben de Groot wrote: >> Timecounters tick every 1.000 msec >> ada0 at ata2 bus 0 scbus0 target 0 lun 0 >> ada0: <MAXTOR STM3160215A 3.AAD> ATA-7 device >> ada0: 66.700MB/s transfers (UDMA4, PIO 8192bytes) >> ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C) >> ada0: Previously was known as ad0 >> ada1 at ata3 bus 0 scbus1 target 0 lun 0 >> ada1: <MAXTOR STM3160215A 3.AAD> ATA-7 device >> ada1: 66.700MB/s transfers (UDMA4, PIO 8192bytes) >> ada1: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C) >> ada1: Previously was known as ad1 >> GEOM: ada0: adding VTOC8 information. >> GEOM_PART: integrity check failed (ada0, VTOC8) >> >> this is where it hangs, just like without setting >> kern.geom.part.check_integrity. >> >> Is this a regression? > > Can you enable verbose boot mode and show what you will get?
It looks like it gets stuck in some loop and I can only break to lom and reset. Type '?' for a list of commands, 'help' for more detailed help. OK unload OK set kern.geom.part.check_integrity="0" OK boot kernel.9 -v /boot/kernel.9/kernel data=0x5af3d8+0xc2fd8 syms=[0x8+0x77fe8+0x8+0x7119d] /boot/kernel.9/geom_mirror.ko text=0x37a10 data=0x5a0+0x18 syms=[0x8+0x1650+0x8+0x1159] jumping to kernel entry at 0xc0070000. Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-STABLE #5: Thu Jun 14 19:24:33 UTC 2012 r...@morninglightmountain.hacktor.net:/usr/obj/usr/src/sys/MORNINGLIGHTMOUNTAIN sparc64 Preloaded elf kernel "/boot/kernel.9/kernel" at 0xc089a000. Preloaded elf module "/boot/kernel.9/geom_mirror.ko" at 0xc089a1a0. real memory = 536870912 (512 MB) avail memory = 503963648 (480 MB) machine: SUNW,UltraAX-i2 cpu0: Sun Microsystems UltraSparc-IIe Processor (400.00 MHz CPU) mask=0x14 maxtl=5 maxwin=7 INTR: Adding CPU 0 as a target ULE: setup cpu 0 nfslock: pseudo-device mem: <memory> null: <null device, zero device> openfirm: <Open Firmware control device> random: <entropy source, Software, Yarrow> ctl: CAM Target Layer loaded nexus0: <Open Firmware Nexus device> pcib0: <U2P UPA-PCI bridge> mem 0x1fe00000000-0x1fe0000ffff,0x1fe01000000-0x1fe010000ff irq 2032,2030,2031,2021 on nexus0 pcib0: Sabre, impl 0, version 0, IGN 0x1f, bus A, 66MHz pcib0: DVMA map: 0x60000000 to 0x63ffffff 8192 entries pcib0: PROM IOTSB size: 1 (2048 entries) pcib0: bus range 0 to 0; PCI bus 0 initalizing intr_countp pcib0: [GIANT-LOCKED] pci0: <OFW PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x108e, dev=0xa001, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10b9, dev=0x1533, revid=0x00 domain=0, bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 found-> vendor=0x10b9, dev=0x7101, revid=0x00 domain=0, bus=0, slot=3, func=0 class=00-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1282, dev=0x9102, revid=0x31 domain=0, bus=0, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0147, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x50 (2400 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x10000, size 8, enabled map[14]: type Memory, range 32, base 0, size 8, enabled found-> vendor=0x1282, dev=0x9102, revid=0x31 domain=0, bus=0, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0147, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x50 (2400 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x10100, size 8, enabled map[14]: type Memory, range 32, base 0x2000, size 8, enabled found-> vendor=0x10b9, dev=0x5237, revid=0x03 domain=0, bus=0, slot=10, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0x1000000, size 12, memory disabled found-> vendor=0x10b9, dev=0x5229, revid=0xc3 domain=0, bus=0, slot=13, func=0 class=01-01-ff, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x10200, size 3, port disabled map[14]: type I/O Port, range 32, base 0x10218, size 2, enabled map[18]: type I/O Port, range 32, base 0x10210, size 3, enabled map[1c]: type I/O Port, range 32, base 0x10208, size 2, enabled map[20]: type I/O Port, range 32, base 0x10220, size 4, enabled pci0: <bridge, PCI-ISA> at device 7.0 (no driver attached) pci0: <old, non-VGA display device> at device 3.0 (no driver attached) dc0: <Davicom DM9102A 10/100BaseTX> port 0x10000-0x100ff mem 0-0xff at device 12.0 on pci0 miibus0: <MII bus> on dc0 amphy0: <DM9102 10/100 media interface> PHY 1 on miibus0 amphy0: OUI 0x000676, model 0x0004, rev. 0 amphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: bpf attached dc0: Ethernet address: 00:03:ba:05:fa:5c dc1: <Davicom DM9102A 10/100BaseTX> port 0x10100-0x101ff mem 0x2000-0x20ff at device 5.0 on pci0 miibus1: <MII bus> on dc1 amphy1: <DM9102 10/100 media interface> PHY 1 on miibus1 amphy1: OUI 0x000676, model 0x0004, rev. 0 amphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc1: bpf attached dc1: Ethernet address: 00:03:ba:05:fa:5c pci0: <serial bus, USB> at device 10.0 (no driver attached) atapci0: <AcerLabs M5229 UDMA66 controller> port 0x10200-0x10207,0x10218-0x1021b,0x10210-0x10217,0x10208-0x1020b,0x10220-0x1022f at device 13.0 on pci0 atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 syscons0: no video adapter found. nexus0: <syscons> type unknown (no driver attached) procfs registered Timecounter "tick" frequency 400000000 Hz quality 1000 Event timer "tick" frequency 400000000 Hz quality 1000 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 (aprobe0:ata2:0:0:0): SIGNATURE: 0000 ata3: reset tp1 mask=03 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 (aprobe1:ata3:0:0:0): SIGNATURE: 0000 (probe0:ctl2cam0:0:1:0): Error 6, Unretryable error pass0 at ata2 bus 0 scbus0 target 0 lun 0 pass0: <MAXTOR STM3160215A 3.AAD> ATA-7 device pass0: Serial Number 9RX82F4A pass0: 66.700MB/s transfers (UDMA4, PIO 8192bytes) pass1 at ata3 bus 0 scbus1 target 0 lun 0 pass1: <MAXTOR STM3160215A 3.AAD> ATA-7 device pass1: Serial Number 9RA6K7MJ pass1: 66.700MB/s transfers (UDMA4, PIO 8192bytes) ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <MAXTOR STM3160215A 3.AAD> ATA-7GEOM: new disk ada0 device ada0: Serial Number 9RX82F4A ada0: 66.700MB/s transfers (UDMA4, PIO 8192bytes) ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 ada1 at ata3 bus 0 scbus1 target 0 lun 0 ada1: <MAXTOR STM3160215A 3.AAD> ATA-7 device ada1: Serial Number 9RA6K7MJ ada1: 66.700MB/s transfers (UDMA4, PIO 8192bytes) ada1: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad1 GEOM: ada0: geometry does not match VTOC8 label (label: 16h,63s GEOM: 255h,255s). GEOM: ada0: adding VTOC8 information. GEOM_PART: partition 7 has end offset beyond last LBA: 146805119 > 48338639 GEOM_PART: partition 8 has start offset beyond last LBA: 146805120 > 48338639 GEOM_PART: partition 8 has end offset beyond last LBA: 312579791 > 48338639 GEOM_PART: integrity check failed (ada0, VTOC8) ata2: reset tp1 mask=03 ostat0=58 ostat1=00 ata2: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 (ada0:ata2:0:0:0): Command timed out (ada0:ata2:0:0:0): Retrying command ata2: reset tp1 mask=03 ostat0=58 ostat1=00 ata2: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 (ada0:ata2:0:0:0): Command timed out (ada0:ata2:0:0:0): Retrying command ata2: reset tp1 mask=03 ostat0=58 ostat1=00 ata2: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 (ada0:ata2:0:0:0): Command timed out (ada0:ata2:0:0:0): Retrying command ata2: reset tp1 mask=03 ostat0=58 ostat1=00 ata2: stat0=0x80 err=0x80 lsb=0x80 msb=0x80 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 (ada0:ata2:0:0:0): Command timed out (ada0:ata2:0:0:0): Retrying command lom> > -- > WBR, Andrey V. Elsukov > _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"