On Wed, 15 Aug 2012 11:40:26 +0200, Dominic Fandrey wrote: > On 15/08/2012 11:16, Niclas Zeising wrote: > > On 2012-08-15 11:07, Andreas Nilsson wrote: > > > On Wed, Aug 15, 2012 at 10:45 AM, Dominic Fandrey > > > <[email protected]>wrote: > > > > On 15/08/2012 10:40, Andreas Nilsson wrote: > > > > > On Wed, Aug 15, 2012 at 10:36 AM, Dominic Fandrey > > > > > <[email protected] > > > > > > wrote: > > > > > > For a while now "acpiconf -i0" always shows the battery state that > > > > > > was correct when booting the system. It's never updated. > > > > > > > > > > > It wont solve the problem, but does the sysctl hw.acpi.battery.time > > > > > update > > > > > correctly? > > > > > > > > > > > > > Thanks for the fast reply, right now it shows -1 (the system was > > > > plugged > > > > in during boot). > > > > > > > > I just unplugged it and it still shows -1: > > > > > > > > > sysctl hw.acpi.battery > > > > > > > > > hw.acpi.battery.life: 99 > > > > hw.acpi.battery.time: -1 > > > > hw.acpi.battery.state: 0 > > > > hw.acpi.battery.units: 2 > > > > hw.acpi.battery.info_expire: 5 > > > > > > Sounds like there is some acpi-problem then. On my thinkpad it takes > > > maybe > > > five seconds for it to go from -1 to an estimate. Also > > > hw.acpi.battery.state=0 for me equals "AC plugged in and battery full". > > > > Just a short "aol". I'm seeing the same issue, also on a HP laptop, a > > HP 6910p with a Core2Duo 2.0GHz processor (can't remember the exact > > model). It has been this way for as long as I can remember (at least a > > year), but I haven't checked into the matter more closely. > > There was a time when this actually worked for me. I should have > reacted instantly when the problem came up, but I had a race car > to build ... FSAE.
I found your correspondence here last December about that, "Re: battery display broken". Looks like it's still the same problem, you were on 9-stable then too. When did it used to work? On either normal or verbose boot messages, are there any ACPI errors logged? This smells a bit like some of the Embedded Controller issues that were coming up late 2010, most resolved by some patches by avg@. Someone then worked around some EC issue using debug.acpi.ec.polled mode rather than relying on notifications, I vaguely recall. You said then you run only one battery, so hw.acpi.battery.units is also still wrong? > > Are you > > running the latest current? I haven't updated in a while, so perhaps > > the issue has been resolved... > > Nay, I stick to the RELENG_ branches. I'll switch to RELENG_10 > shortly before a 10.0 release. If there's any indication of ACPI errors on boot (or later) this would be worthy of a PR, especially as you're not alone in this, on HP gear. I suppose you've checked HP for any more recent BIOS &/or EC updates? cheers, Ian _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
