On 2012-12-17 15:38, Steven Hartland wrote: > Check the smart results of each disk in the array you may have a failing > disk. > ----- Original Message ----- From: "Willem Jan Withagen" <[email protected]> > To: "FreeBSD Stable Users" <[email protected]> > Sent: Monday, December 17, 2012 10:58 AM > Subject: Strange CAM errors > > >> Hi, >> >> I have not noticed this before, but my system rebooted this morning and >> in the following security report I found a lot of messgaes in the >> dmesg-part like: >> >> +(probe0:arcmsr0:0:16:1): INQUIRY. CDB: 12 20 0 0 24 0 >> +(probe0:arcmsr0:0:16:1): CAM status: Command timeout >> +(probe0:arcmsr0:0:16:1): Retrying command >> +(probe0:arcmsr0:0:16:1): INQUIRY. CDB: 12 20 0 0 24 0 >> +(probe0:arcmsr0:0:16:1): CAM status: Command timeout >> +(probe0:arcmsr0:0:16:1): Retrying command >> >> And it seems that bus 16 is: >> +pass6 at arcmsr0 bus 0 scbus0 target 16 lun 0 >> +pass6: <Areca RAID controller R001> Fixed Processor SCSI-0 device >> >> The system has been running >> FreeBSD zfs.digiware.nl 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #3: Wed >> Nov 14 13:25:55 CET 2012 >> [email protected]:/usr/obj/usr/srcs/src9/src/sys/ZFS amd64 >> for already a while. >> >> Anybody suggestions as to why I have these messages? >> >> They are during the boot sequence, so no smartd talking to the disks at >> that moment. >> >> --WjW >> >> ps: dmesg, config, etc.... at:
>> http://www.tegenbosch28.nl/FreeBSD/Systems/ZFS >> ps2: upgrading to the most recent 9.1 'mmm, Smartd seems to think otherwise... 'camcontrol rescan all' actually delivers the same pack of errors. --WjW _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
