On Jan 4, 2013, at 5:39 AM, Vincent Hoffman <[email protected]> wrote:
> On 03/01/2013 21:18, Paul Mather wrote:
>>
>>
>> It turns out it was my /boot.config that was preventing booting. The system
>> is usually always headless, so I have "-S115200 -Dh" as the sole line in
>> /boot.config to enable a 115200 baud serial console. This has been working
>> fine for me up until I did a {build,install} {kernel,world} on 1st January
>> 2013. I was pretty sure my woes began after I did the "zpool upgrade -a"
>> and subsequently rebooted again, but now I can't be sure whether I
>> successfully rebooted at all after the "make installworld" and mergemaster
>> step.
>>
>> Does anyone know a sure-fire way of getting a dual console setup (high-speed
>> serial + VGA). The recipe I had been using had worked well for a long time.
>> I had "-S115200 -Dh" in /boot.config and the following entries in
>> /boot/loader.conf:
>>
>> boot_multicons="YES"
>> comconsole_speed="115200"
>> console="comconsole,vidconsole"
>>
>> Now, though, if I have "-S115200 -Dh" then the system locks up at boot.
>> Removing /boot.config gets me dual console, but only at 9600 baud. :-(
> I have
> root@copia:/root # more /boot.config
> -Dh
>
> and
> root@copia:/root # grep 'cons' /boot/loader.conf
> console="comconsole,vidconsole"
> comconsole_speed="19200"
> boot_multicons="yes"
>
> Which works fine for ipmi based serial over lan console in a generic
> 9.1-RELEASE.
> Not sure thats that helpful but 19200 is better than 9600 ;)
That's weird. I have the same basic /boot/loader.conf entries (except for a
speed of 115200) and even just putting "-Dh" into /boot.config leads to the
same unbootable system behaviour. :-(
Maybe something broke recently in the RELENG_8 boot loader? Like I said
originally, that /boot.config entry had been working for me without problems
for a long time.
Cheers,
Paul.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[email protected]"
