On Thursday, February 21, 2013 5:45:13 am Daniel O'Connor wrote: > Hi all, > A recent thread inspired me to try getting a proper serial console working on a Supermicro X9SCL motherboard with IPMI. > > However I find that while I see loader messages and the getty I enabled after boot I don't get any kernel messages which does somewhat limit the utility.. > > The BMC creates COM3 (/dev/cuau2) which works with getty. I modified /boot/loader.conf like so.. > boot_multicons="yes" > boot_serial="YES" > console="comconsole vidconsole" > comconsole_speed="115200" > # Disable console flags on these 2 ports > hint.uart.0.flags="0x00" > hint.uart.1.flags="0x00" > # Set console flag > hint.uart.2.flags="0x10" > > Does anyone have any hints?
Rather than using all these hints, just use these three in loader.conf: console="comconsole vidconsole" console_speed=115200 console_port="0x<blah>" (where <blah> is the correct I/O port for COM3, 0x3e8 maybe?) -- John Baldwin _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
