On 02/21/13 14:15, Konstantin Belousov wrote: > On Thu, Feb 21, 2013 at 02:07:57PM -0800, Navdeep Parhar wrote: >> On 02/21/13 13:56, Daniel O'Connor wrote: >>> >>> On 22/02/2013, at 2:19, John Baldwin <[email protected]> wrote: >>>>> Does anyone have any hints? >>>> >>>> Rather than using all these hints, just use these three in loader.conf: >>>> >>>> console="comconsole vidconsole" >>>> console_speed=115200 >>>> console_port="0x<blah>" (where <blah> is the correct I/O port for COM3, >>>> 0x3e8 >>>> maybe?) >>> >>> >>> No dice :( >>> >>> I also tried booting with '-D -h -S 115200' but nothing either. >> >> What does "dmesg | grep uart" show? I have a PCI serial card whose >> serial port I'm using as a console. I had to setup comconsole_pcidev, >> comconsole_port, and comconsole_speed properly in loader.conf to get it >> to work. > > Do you need the comconsole_port if comconsole_pcidev is set properly ? > comconsole_port should be set automatically (i.e., read from the BAR) > if _pcidev is correct. >
I just tried it -- it works without the comconsole_port. So yes, it's reading the port value automatically. (I see it in kenv and of course I can see that my console is working). _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[email protected]"
