Zoran Kolic wrote this message on Fri, Mar 15, 2013 at 17:15 +0100:
> After I installed 9.1 amd64 on node with amd 8120,
> I was not able to read temperatures out of the box.
> I fetched source for head module and compiled. And
> loaded module. Still nothing. I assume my cpu is
> a bit different.
Have you tried loading the module at boot time w/ loader.conf? I
was just looking at one of my machines that should be supported by
amdtemp, but hostb had already attached to it:
hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x16031022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 15h Processor Function 3'
class = bridge
subclass = HOST-PCI
I haven't done this yet, as my other machine that isn't in production
isn't supported by amdtemp, but looks like it may suffer the same issue:
hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x14031022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'Family 15h (Models 10h-1fh) Processor Function 3'
class = bridge
subclass = HOST-PCI
--
John-Mark Gurney Voice: +1 415 225 5579
"All that I will do, has been done, All that I have, has not."
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
