I updated one of my sparc64 machines (a V240, dual processor, 8GB
of memory) and now it panics.
Before (working without issue):
FreeBSD spork.pix.net 10.3-STABLE FreeBSD 10.3-STABLE #18 r299561: Thu
May 12 16:28:16 EDT 2016
l...@spork.pix.net:/usr/obj/usr/src/sys/GENERIC sparc64
Updated (panics during boot):
lidl@spork-114: svnlite info
Path: .
Working Copy Root Path: /usr/src
URL: svn://hydra.pix.net/stable/10
Relative URL: ^/stable/10
Repository Root: svn://hydra.pix.net
Repository UUID: 13f3649d-50b2-e011-b72e-0019bb358710
Revision: 299673
Node Kind: directory
Schedule: normal
Last Changed Author: ngie
Last Changed Rev: 299651
Last Changed Date: 2016-05-13 05:52:39 -0400 (Fri, 13 May 2016)
Boot messages from where it panics:
----- snip, snip -----
jumping to kernel entry at 0xc00a8000.
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-STABLE #19 r299673: Fri May 13 12:24:06 EDT 2016
l...@spork.pix.net:/usr/obj/usr/src/sys/GENERIC sparc64
gcc version 4.2.1 20070831 patched [FreeBSD]
real memory = 8589934592 (8192 MB)
avail memory = 8379719680 (7991 MB)
cpu0: Sun Microsystems UltraSparc-IIIi Processor (1503.00 MHz CPU)
cpu1: Sun Microsystems UltraSparc-IIIi Processor (1503.00 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random: <Software, Yarrow> initialized
kbd0 at kbdmux0
nexus0: <Open Firmware Nexus device>
pcib0: <Sun Host-PCI bridge> mem
0x4000ff00000-0x4000ff0afff,0x4000fc10000-0x4000fc1701f,0x7f600000000-0x7f6000000ff,0x4000ff80000-0x4000ff8ffff
irq 2035,2032,2033,2036,2019 on nexus0
pcib0: Tomatillo, version 4, IGN 0x1f, bus B, PCI mode, 66MHz
pcib0: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pci0: <OFW PCI bus> on pcib0
pcib1: <Sun Host-PCI bridge> mem
0x4000f600000-0x4000f60afff,0x4000f410000-0x4000f41701f,0x7fe00000000-0x7fe000000ff,0x4000f780000-0x4000f78ffff
irq 1970,1968,1969,1972,1953 on nexus0
pcib1: Tomatillo, version 4, IGN 0x1e, bus A, PCI mode, 33MHz
pcib1: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pci1: <OFW PCI bus> on pcib1
pcib2: <Sun Host-PCI bridge> mem
0x4000e600000-0x4000e60afff,0x4000e410000-0x4000e41701f,0x7ce00000000-0x7ce000000ff,0x4000e780000-0x4000e78ffff
irq 1842,1840,1841,1844,1827 on nexus0
pcib2: Tomatillo, version 4, IGN 0x1c, bus A, PCI mode, 66MHz
pcib2: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pci2: <OFW PCI bus> on pcib2
pcib3: <Sun Host-PCI bridge> mem
0x4000ef00000-0x4000ef0afff,0x4000ec10000-0x4000ec1701f,0x7c600000000-0x7c6000000ff,0x4000ef80000-0x4000ef8ffff
irq 1907,1904,1905,1908,1893 on nexus0
pcib3: Tomatillo, version 4, IGN 0x1d, bus B, PCI mode, 66MHz
pcib3: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pci3: <OFW PCI bus> on pcib3
nexus0: <memory-controller> mem 0x40000000000-0x40000000007 type
memory-controller (no driver attached)
nexus0: <memory-controller> mem 0x40000800000-0x40000800007 type
memory-controller (no driver attached)
bge0: <Broadcom BCM5704 A3, ASIC rev. 0x002003> mem
0x200000-0x20ffff,0x110000-0x11ffff at device 2.0 on pci0
bge0: CHIP ID 0x00002003; ASIC REV 0x02; CHIP REV 0x20; PCI on PCI-X 66
MHz; 64bit
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:03:ba:e0:ce:07
bge1: <Broadcom BCM5704 A3, ASIC rev. 0x002003> mem
0x400000-0x40ffff,0x120000-0x12ffff at device 2.1 on pci0
bge1: CHIP ID 0x00002003; ASIC REV 0x02; CHIP REV 0x20; PCI on PCI-X 66
MHz; 64bit
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 1000BASE-T media interface> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: 00:03:ba:e0:ce:08
isab0: <PCI-ISA bridge> at device 7.0 on pci1
isa0: <ISA bus> on isab0
pci1: <old, non-VGA display device> at device 6.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0x1000000-0x1000fff at device 10.0 on pci1
usbus0 on ohci0
atapci0: <AcerLabs M5229 UDMA100 controller> port
0x900-0x907,0x918-0x91b,0x910-0x917,0x908-0x90b,0x920-0x92f at device
13.0 on pci1
atapci0: using PIO transfers above 137GB as workaround for 48bit DMA
access bug, expect reduced performance
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
sym0: <1010-66> port 0x900-0x9ff mem 0x100000-0x1003ff,0x102000-0x103fff
at device 2.0 on pci2
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: <1010-66> port 0xa00-0xaff mem 0x104000-0x1043ff,0x106000-0x107fff
at device 2.1 on pci2
sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
bge2: <Broadcom BCM5704 A3, ASIC rev. 0x002003> mem
0x200000-0x20ffff,0x110000-0x11ffff at device 2.0 on pci3
bge2: CHIP ID 0x00002003; ASIC REV 0x02; CHIP REV 0x20; PCI on PCI-X 66
MHz; 64bit
miibus2: <MII bus> on bge2
brgphy2: <BCM5704 1000BASE-T media interface> PHY 1 on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Ethernet address: 00:03:ba:e0:ce:09
bge3: <Broadcom BCM5704 A3, ASIC rev. 0x002003> mem
0x400000-0x40ffff,0x120000-0x12ffff at device 2.1 on pci3
bge3: CHIP ID 0x00002003; ASIC REV 0x02; CHIP REV 0x20; PCI on PCI-X 66
MHz; 64bit
miibus3: <MII bus> on bge3
brgphy3: <BCM5704 1000BASE-T media interface> PHY 1 on miibus3
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Ethernet address: 00:03:ba:e0:ce:0a
nexus0: <syscons> type unknown (no driver attached)
rtc0: <Real-Time Clock> at port 0x70-0x71 on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 44 on isa0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 44 on isa0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounter "tick" frequency 1503000000 Hz quality 10
Timecounter "stick" frequency 12000000 Hz quality 10
Event timer "tick" frequency 1503000000 Hz quality 1000
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <AcerLabs> at usbus0
uhub0: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
panic: trap: fast data access mmu miss (kernel)
cpuid = 0
KDB: stack backtrace:
#0 0xc0583bc0 at panic+0x20
#1 0xc08ef254 at trap+0x554
Uptime: 6s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
----- snip, snip -----
The same part of the dmesg from the working boot:
----- snip, snip -----
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <AcerLabs> at usbus0
uhub0: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
random: unblocking device.
da0 at sym0 bus 0 scbus2 target 0 lun 0
da0: <HITACHI HUS10733ASUN72G PA05> Fixed Direct Access SCSI-3 device
----- snip, snip -----
-Kurt
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
