Hello,
We have machine with Areca controller:
arcmsr0: <Areca SATA 3G Host Adapter RAID Controller
arcmsr version 1.40.00.00 2017-07-11
> mem 0xde000000-0xde0fffff,0xde110000-0xde11ffff,0xde100000-0xde10ffff
irq 17 at device 0.0 on pci2
Areca RAID adapter0: ARC-1200 F/W version V1.50 2012-01-04
smartmontools worked on device arcmsr0 for years, but after system
upgrade from 10.3 to 10.4-RELEASE smartmontools does not return results,
it hangs indefinitely.
Smartmontools packages are built on our Poudriere with OS version 10.4
so it should match.
We use smartctl with this params:
# smartctl -A -d areca,2 /dev/arcmsr0
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.4-RELEASE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Nothing more is displayed. Pressing Ctrl+T gives me
load: 3.01 cmd: smartctl 25305 [running] 71.45r 3.09u 68.25s 100% 4204k
load: 3.01 cmd: smartctl 25305 [running] 74.96r 3.26u 71.58s 100% 4204k
I tried to run areca-cli but it also shows nothing. OS is running from
RAID device da0 fine, but controller info is inaccessible.
Was there some changes between 10.3 / 10.4?
What can I do to debug this problem?
Kind regards
Miroslav Lachman
_______________________________________________
freebsd-stable@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
