On 10/25/2017 4:54 PM, Mike Tancsa wrote:
> While testing out our nanobsd RELENG11 images, I noticed a strange
> routing issue. Using a standard pppoe config that has been working fine
> on RELENG8,9,10 I am getting bogus routing entries.
> having the commands in ppp.linkup
>
> pppoe:
> add 192.168.134.2/32 HISADDR
> add 192.168.134.3/32 HISADDR
> add 192.168.134.4/32 HISADDR
> add 192.168.134.5/32 HISADDR
Upping the logs with debug
ppp[60212]: tun0: Command: pppoe: add 192.168.134.2/32 HISADDR
ppp[60212]: tun0: Debug: wrote 124: cmd = Add, dst = 192.168.134.2,
gateway = 64.7.128.7
The gateway is correct. Seems right, but its not installing it right.
It also borkes on the ipv6 addr which I have disabled
ppp[60212]: tun0: Warning: ff02::: Change route failed: errno: Value too
large to be stored in data type
ppp[60212]: tun0: Debug: deflink: DescriptorRead: read 14/2048 from 1
ppp[60212]: tun0: Debug: proto_LayerPull: unknown -> 0xc021
ppp[60212]: tun0: Debug: link_PullPacket: Despatch proto 0xc021
Any ideas ?
---Mike
--
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, [email protected]
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[email protected]"
