Built this morning.... FreeBSD 11.2-STABLE #0 r341796: Mon Dec 10 13:20:13 CST 2018
System is a pcEngines machine, apu2c0. It has been running on 11.0-STABLE for well north of a year without problems. It boots and runs on 11.2, but I'm getting a LOT of these errors... mmc0: CMD7 failed, RESULT: 1 mmc0: Card at relative address 43690 failed to select mmc0: CMD7 failed, RESULT: 1 mmc0: Card at relative address 43690 failed to select mmc0: CMD7 failed, RESULT: 1 mmc0: Card at relative address 43690 failed to select mmc0: CMD7 failed, RESULT: 1 mmc0: Card at relative address 43690 failed to select mmc0: CMD7 failed, RESULT: 1 mmc0: Card at relative address 43690 failed to select mmc0: Card at relative address 43690 failed to select mmc0: Card at relative address 43690 failed to select mmc0: Card at relative address 43690 failed to select mmc0: Card at relative address 43690 failed to select mmc0: Card at relative address 43690 failed to select mmc0: Card at relative address 43690 failed to select mmc0: Card at relative address 43690 failed to select Same SD card, same everything EXCEPT that I booted partition 2 (for 11.2) rather than partition 1 (11.0.) In both cases the root filesystem is mounted read-only (this is a NanoBSD config) so there shouldn't be any write I/O going to the card at all. As far as I can tell the errors going to the console aren't preventing anything from starting and running, but they sure don't look good! dmesg -a from 11.0 (by the time I can get to it on 11.2 the boot messages are long-since scrolled off) Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-STABLE #0 r312669M: Wed Jun 14 17:57:26 CDT 2017 [email protected]:/pics/Crochet-work-AMD/obj/usr/src/sys/KSD-SMP amd64 FreeBSD clang version 3.9.1 (tags/RELEASE_391/final 289601) (based on LLVM 3.9.1) VT(vga): resolution 640x480 CPU: AMD GX-412TC SOC (998.15-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x730f01 Family=0x16 Model=0x30 Stepping=1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x1d4037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PTSC,PL2I> Structured Extended Features=0x8<BMI1> XSAVE Features=0x1<XSAVEOPT> SVM: NP,NRIP,AFlush,DAssist,NAsids=8 TSC: P-state invariant, performance statistics real memory = 2012930048 (1919 MB) avail memory = 1906143232 (1817 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <CORE COREBOOT> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) ioapic1: Changing APIC ID to 5 ioapic0 <Version 2.1> irqs 0-23 on motherboard ioapic1 <Version 2.1> irqs 24-55 on motherboard random: entropy device external interface kbd0 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff8101fd00, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <CORE COREBOOT> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.2 on pci0 pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff pci1: <ACPI PCI bus> on pcib1 igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xfe700000-0xfe71ffff,0xfe720000-0xfe723fff at device 0.0 on pci1 igb0: Using MSIX interrupts with 3 vectors igb0: Ethernet address: 00:0d:b9:46:71:88 igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: netmap queues/slots: TX 2/1024, RX 2/1024 pcib2: <ACPI PCI-PCI bridge> at device 2.4 on pci0 pci2: <ACPI PCI bus> on pcib2 igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x2000-0x201f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe823fff at device 0.0 on pci2 igb1: Using MSIX interrupts with 3 vectors igb1: Ethernet address: 00:0d:b9:46:71:89 igb1: Bound queue 0 to cpu 2 igb1: Bound queue 1 to cpu 3 igb1: netmap queues/slots: TX 2/1024, RX 2/1024 pci0: <encrypt/decrypt> at device 8.0 (no driver attached) xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb22000-0xfeb23fff at device 16.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Unable to map MSI-X table usbus0 on xhci0 ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x3010-0x3017,0x3020-0x3023,0x3018-0x301f,0x3024-0x3027,0x3000-0x300f mem 0xfeb25000-0xfeb253ff at device 17.0 on pci0 ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb25400-0xfeb254ff at device 19.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 sdhci_pci0: <Generic SD HCI> mem 0xfeb25500-0xfeb255ff at device 20.7 on pci0 sdhci_pci0: 1 slot(s) allocated mmc0: <MMC/SD bus> on sdhci_pci0 amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb5 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) orm0: <ISA Option ROMs> at iomem 0xc0000-0xc0fff,0xef000-0xeffff on isa0 ppc0: cannot reserve I/O port range uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec DUMMYNET 0 with IPv6 initialized (100409) load_dn_sched dn_sched QFQ loaded usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched FQ_CODEL loaded load_dn_sched dn_sched FQ_PIE loaded load_dn_sched dn_sched PRIO loaded load_dn_aqm dn_aqm CODEL loaded load_dn_aqm dn_aqm PIE loaded nvme cam probe device init ugen0.1: <0x1022 XHCI root HUB> at usbus0 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <AMD EHCI root HUB> at usbus1 uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 mmcsd0: 16GB <SDHC SL16G 8.0 SN A4981A22 MFG 01/2017 by 3 SD> at mmc0 31.5MHz/4bit/65535-block SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC" frequency 998148762 Hz quality 1000 Trying to mount root from ufs:/dev/mmcsd0s1a [ro]... uhub0: 4 ports with 4 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen1.2: <vendor 0x0438 product 0x7900> at usbus1 uhub2 on uhub1 uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1 uhub2: 4 ports with 4 removable, self powered random: unblocking device. Setting hostuuid: 1295647e-51e2-11e7-a9c2-000db9467188. Setting hostid: 0xa175f087. Starting file system checks: /dev/mmcsd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mmcsd0s1a: clean, 2091305 free (7889 frags, 260427 blocks, 0.2% fragmentation) /dev/mmcsd0s3: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mmcsd0s3: clean, 118711 free (31 frags, 14835 blocks, 0.0% fragmentation) /dev/mmcsd0s4: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/mmcsd0s4: clean, 700000 free (920 frags, 87385 blocks, 0.1% fragmentation) Mounting local filesystems:. ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/lib/ipsec /usr/local/lib/perl5/5.24/mach/CORE 32-bit compatibility ldconfig path: /usr/lib32 Setting hostname: IpGw.Denninger.Net. Additional TCP/IP options: IPv6 CPE WANIF=igb0. Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: eval: cannot create /boot/entropy: Read-only file system Starting Network: lo0 igb0 igb1 enc0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> groups: lo igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=6000bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,RXCSUM_IPV6,TXCSUM_IPV6> ether 00:0d:b9:46:71:88 inet6 fe80::20d:b9ff:fe46:7188%igb0 prefixlen 64 scopeid 0x1 nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier igb1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=2000bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,RXCSUM_IPV6> ether 00:0d:b9:46:71:89 inet 192.168.10.200 netmask 0xffffff00 broadcast 192.168.10.255 inet 192.168.2.200 netmask 0xffffff00 broadcast 192.168.2.255 inet6 fe80::20d:b9ff:fe46:7189%igb1 prefixlen 64 scopeid 0x2 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier enc0: flags=0<> metric 0 mtu 1536 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> groups: enc Starting devd. Starting Network: enc0. enc0: flags=0<> metric 0 mtu 1536 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> groups: enc igb1: link state changed to UP igb1.3: link state changed to UP igb0: link state changed to UP Starting dhclient. DHCPDISCOVER on igb0 to 255.255.255.255 port 67 interval 7 DHCPOFFER from 10.2.224.1 DHCPREQUEST on igb0 to 255.255.255.255 port 67 DHCPACK from 10.2.224.1 bound to 68.1.57.197 -- renewal in 43200 seconds. add host 127.0.0.1: gateway lo0 fib 0: route already in table Additional inet routing options: gateway=YES. add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Additional inet6 routing options: gateway=YES. ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled Firewall rules loaded. Starting local_unbound. [1544477459] unbound[782:0] warning: too many file descriptors requested. The builtinmini-event cannot handle more than 1024. Config for less fds or compile with libevent [1544477459] unbound[782:0] warning: continuing with less udp ports: 948 Waiting for nameserver to start... good Starting dhcp6c. Creating and/or trimming log files. Starting syslogd. Clearing /tmp (X related). Starting strongSwan 5.5.3 IPsec [starter]... no netkey IPsec stack detected no KLIPS IPsec stack detected no known IPsec stack detected, ignoring! Starting local daemons:add net 192.168.2.0: gateway 192.168.10.100 fib 0: route already in table . Updating motd:. Mounting late filesystems:. Starting ntpd. Starting powerd. Starting rtadvd. Dec 10 15:31:01 IpGw ntpd[985]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired less than 558 days ago Starting dhcpd. Internet Systems Consortium DHCP Server 4.3.5 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Config file: /usr/local/etc/dhcpd.conf Database file: /var/db/dhcpd.leases PID file: /var/run/dhcpd.pid Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 0 leases to leases file. Listening on BPF/igb1.3/00:0d:b9:46:71:89/192.168.4.0/24 Sending on BPF/igb1.3/00:0d:b9:46:71:89/192.168.4.0/24 Listening on BPF/igb1/00:0d:b9:46:71:89/two-on-cable Sending on BPF/igb1/00:0d:b9:46:71:89/two-on-cable Sending on Socket/fallback/fallback-net Starting sshguard. Starting snmpd. cannot forward src fe80:2::396c:673e:9cf:ba21, dst 2600:1402:16::17db:a212, nxt 6, rcvif igb1, outif igb0 Starting openvpn. tun0: link state changed to UP Configuring vt: blanktime. Performing sanity check on sshd configuration. Starting sshd. Starting sendmail_submit. Starting sendmail_msp_queue. Starting cron. Starting background file system checks in 60 seconds. Mon Dec 10 15:31:06 CST 2018 cannot forward src fe80:2::396c:673e:9cf:ba21, dst 2600:1402:16::17db:a212, nxt 6, rcvif igb1, outif igb0 cannot forward src fe80:2::396c:673e:9cf:ba21, dst 2600:1402:16::17db:a212, nxt 6, rcvif igb1, outif igb0 cannot forward src fe80:2::396c:673e:9cf:ba21, dst 2600:1402:16::17db:a212, nxt 6, rcvif igb1, outif igb0 cannot forward src fe80:2::396c:673e:9cf:ba21, dst 2600:1402:16::17db:a212, nxt 6, rcvif igb1, outif igb0 -- Karl Denninger [email protected] <mailto:[email protected]> /The Market Ticker/ /[S/MIME encrypted email preferred]/
smime.p7s
Description: S/MIME Cryptographic Signature
