sreehari wrote this message on Thu, Oct 08, 2020 at 16:04 -0700: > ok I tried cherry picking the commit from head to stable/12 according to > one person's suggestion and I get some hunk failed's when i try patch -C > -p0. Is there any way I can simulate the MFC? Sorry I'm just not familiar > with svn
Sorry, I missed this reply... I'll be merging the change into stable/12 in the comming week... > On Thu, Oct 8, 2020, 00:53 John-Mark Gurney <j...@funkthat.com> wrote: > > > sreehari wrote this message on Wed, Oct 07, 2020 at 23:56 -0700: > > > I see. Since I have the hardware and freebsd head seems broken on my > > > laptop, I'll try compiling stable/12 with the ure patch from head within > > > the next few days. I have gigabit internet and other machines to test the > > > ethernet with the full 1000Mbps. Are there any actions you suggest I take > > > to benchmark or stress test the hardware or make sure everything is > > working > > > properly? > > > > Nothing in particular... iperf or iperf3 works well... do normal > > transfers and make sure you don't see packet drops that are unexpected > > (checksumming was enabled)... If you have vlans, use those... Just be > > aware of any unexpected behaviors.. > > > > Thanks for the additional testing! And letting mek now that it works > > is useful! > > > > > On Wed, Oct 7, 2020, 23:36 John-Mark Gurney <j...@funkthat.com> wrote: > > > > > > > Kurt Jaeger wrote this message on Thu, Oct 08, 2020 at 06:36 +0200: > > > > > > sreehari wrote this message on Tue, Oct 06, 2020 at 21:02 -0700: > > > > > > > I have a USB C hub that supports gigabit ethernet under any > > other OS, > > > > > > > but under FreeBSD it seems to detect it properly, but I never get > > > > > > > speeds exceeding 100Mbps transfer rate on the whole thing. Is > > this a > > > > > > > known issue? Also is there any way to check what the perceived > > link > > > > > > > speed is? I've attached dmesg.boot if that helps. > > > > > > > > > > > > This is a known issue w/ the ure driver on FreeBSD. This has been > > > > > > fixed in -current, and in a few months I'll look at merging it to > > > > > > stable/12, but it definitly will not make the 12.2 release: > > > > > > https://reviews.freebsd.org/D25809 > > > > > > > > > > The changes seem to be limited to the driver itself -- is some > > > > > structural change in 13 stopping a merge to 12.2 ? > > > > > > > > The issue is that IMO, it's too close to the release of 12.2. It only > > > > recently got committed to 13, and so hasn't had enough time to be > > tested > > > > in more environments than mine. There have been a few others that have > > > > tested it. -- John-Mark Gurney Voice: +1 415 225 5579 "All that I will do, has been done, All that I have, has not." _______________________________________________ freebsd-stable@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
