Hi Folks,
We are getting "Queuing a BDR SCB" errors and then related
problems trying to access a DLT tape library via `amlabel`
or `chio` (which `amlabel` uses). It seems to be
related to wait-states as acessing the first 6 slots never
causes an error - slots 7+ do - the library seems to take longer
to seat the cartridges as it homes each time before shopping
for a cartridge. The drive works fine on an HPUX system.
We've gone into the SCSI card and reset the tranfer rate to 10mb/s.
I looked for some notes re: this and the only reference I found
was re: dual CPU interrpts; we are using a dual PII system. As
I write this a single cpu kernal is being built that we will
try. Should we try a single cpu motherboard system or?
System description:
System 4.2 stable (cvsup 12/10/00)
Dual 266mhz PII, PB2-D ASUS MB,
Adaptec 3940 card
Overland 4000 DLT tape library
thanks,
hurf
--
Hurf Sheldon, Dir. Research Systems email:
[EMAIL PROTECTED]
Program of Computer Graphics voice:607 255 6713 fax:607 255 0806
580 Rhodes Hall, Cornell University
http://www.graphics.cornell.edu/~hurf/
Ithaca, N.Y. 14853
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
