Lars Eggert <[EMAIL PROTECTED]> probably said:
> Lars Eggert wrote:
> > The Intel PRO/1000F NIC does not seem to be fully supported by the wx
> > driver.
> Sorry for not mentioning this in the original post: This card uses the
> Intel 82543GC chip.
I realise this isn't very useful to you for getting that card working,
but if you need gig ether working sooner than a fix I've been using
the Netgear GA620, both fibre and copper versions;
ti0: <Netgear GA620 1000baseT Gigabit Ethernet> mem 0xf4000000-0xf4003fff
irq 10 at device 15.0 on pci0
ti0: gigabit link up
ti0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 130.64.1.222 netmask 0xffffff00 broadcast 130.64.1.255
ether 00:02:e3:00:3d:a0
media: autoselect (1000baseTX <full-duplex>) status: active
supported media: autoselect 1000baseTX <full-duplex> 1000baseTX
100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP
Negotiates fine with the Foundry kit we use, at 100bT fdx and gbit fdx.
P.
--
pir [EMAIL PROTECTED] [EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
