I have an N440BX motherboard that, when using console redirection (so the
BIOS messages and such come over the serial port), displays the following:
BTX loader 1.00 BTX version is 1.01
Console: internal video/keyboard
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 635kB/523200kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
([EMAIL PROTECTED], Wed Oct 4 15:01:32 PDT 2000)
Loading /boot/defaults/loader.conf
int=0000000d err=00000000 efl=00010216 eip=00005a6c
eax=ff08428b ebx=0000760c ecx=ffffffff edx=00030160
esi=00037788 edi=00093468 ebp=00093258 esp=00093258
cs=002b ds=0033 es=0033 fs=0033 gs=0033 ss=0033
cs:eip=89 11 83 40 08 04 c9 c3-55 89 e5 8b 45 08 8b 48
ss:esp=98 32 09 00 d8 91 00 00-8b 42 08 ff 60 01 03 00
BTX halted
I was wondering if anyone else has seen this. The problem seems somewhat
intermittent. It doesn't *always* happen but it often does. If I hit the
reset switch, it seems to boot reliably from there.
This system (actually systems. It's more than one so I know it's not
hardware) booted perfectly until I enabled the console redirection.
Nothing on the box has changed other than that.
Any ideas? I'm stumped.
-gordon
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
