Hi,
On 19-Aug-01 Matthias Schuendehuette wrote:
>
> there's a showstopper in 4.4-RC1 as of Sat, 18th Aug, around 18:00 UTC:
>
> My machine stopps booting after submitting the SCSI-Reset command to
> both
> of my 'sym'-Controllers.
>
Just for information: This was *not* the PCI-Problem (which came soon
afterwards) but a problem with the onboard USB-device (VIA KT133/686B).
I had disabled the USB device since I started using my actual motherboard
(EPOX 8KTA2). A few days ago, I enabled the USB device to see if it was
recognized by FreeBSD but I missed to *enable* an IRQ for the USB-Device.
This produced the boot hang. The last messages from 'boot -v' (which I
used far too late, excuse me...) I could see was:
Device configuration finished.
device combination doesn't support shared irq0
intr_connect(irq0) failed, result=-1
After I saw this message I remembered the USB device and disabled it at
once - FreeBSD booted again! Further tests led to the missing/disabled
IRQ for the USB device.
FreeBSD 4.4-RC now
- boots again
- probes all PCI devices :-)
- recognizes USB as well as ACPI
- operates all ISDN devices again (thank you, Hellmuth!)
- works like a charm! :-)))
Ciao/BSD - Matthias
----------------------------------
Matthias Schuendehuette <[EMAIL PROTECTED]>
Solmsstrasse 44 Date: 23-Aug-01
D-10961 Berlin Time: 21:37:06
This message was sent by XFMail + FreeBSD 4.4-RC
----------------------------------
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
