Once upon a 16-11-2001, Chris Knight hit keys in the following order: > > controller as the primary device. CD1 on 4.3 boots successfully, but CD1 on > 4.4 hangs immediately after detecting plip0. On the 4.3 boot, the line > straight after plip0 is acd0. Disabling both IDE channels in the BIOS
I ran into the same problems when trying to install the latest 4.4-STABLE snapshot, also on a P2B-S. After compiling a custom kernel for that machine, though, the problem disappeared. here's the config: machine i386 cpu I686_CPU ident P2B-S maxusers 32 options NMBCLUSTERS=8192 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH options MFS #Memory Filesystem options NFS #Network Filesystem options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options USERCONFIG #boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options _KPOSIX_VERSION=199309L options ICMP_BANDLIM #Rate limit bad replies device isa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices # SCSI peripherals device scbus # SCSI bus (required) device da # SCSI direct access devices (aka disks) device pass # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? options VESA # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 options SC_HISTORY_SIZE=2000 # number of history buffer lines options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode options SC_DISABLE_DDBKEY # disable `debug' key options SC_DISABLE_REBOOT # disable reboot key sequence options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor options SC_NORM_ATTR="(FG_GREEN|BG_BLACK)" options SC_NORM_REV_ATTR="(FG_YELLOW|BG_GREEN)" options SC_KERNEL_CONS_ATTR="(FG_RED|BG_BLACK)" options SC_KERNEL_CONS_REV_ATTR="(FG_BLACK|BG_RED)" # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device ppc0 at isa? irq 7 device ppbus device plip device ppi # PCI Ethernet NICs that use the common MII bus controller code. device miibus device xl # Pseudo devices - the number indicates how many units to allocated. pseudo-device bpf # Berkeley packet filter pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message
