On Tue, 09 Jul 2002 23:51:08 -0400
Mike Tancsa <[EMAIL PROTECTED]> wrote:
>
> Works correctly in what sense ? i.e. you can read and write to it under
> some OS ? But not on this version of FreeBSD ?
Yes, I tested the drive under FreeBSD 4.3-RELEASE and 4.5-STABLE (before new ATA
drivers)
and 4.6-stable (27th June). No problem.
>
> >And worked since 4.3-RELEASE with the same sysctl parameters
> >ata-1 is dead
>
> Do you mean ad1 ? If so, If you take ad1 out and adjust ata-0's jumpers so
> that its a master with no slave, does it now work ?
I put ad2 to ad1, and on heavy load ATA channel 0 failed to.
I removed my "strange disk" to and put, added another one.
Same symptoms.
> If not ad1, what do you mean by ata-1 is dead ? Or do you mean ata-1 the
> controller is actually dead ? If so, get rid of the second drive.
ATA channel 0 is dying to I think.
It's not a big problem for, I'll get rid of ata drive for my box,
I just wonder why FreeBSD get frozen on atapi failure :)
>
> Try sysctl -w hw.ata.ata_dma=0 or add hw.ata.ata_dma=0 into
> /boot/loader.conf and reboot.
No change.
cheers
clem
******
UPDATE : of atacontrol cap of ad2
Sorry i mistyped :)
[root@goofy|(510)| root]# atacontrol cap 1 0
ATA channel 1, Master, device ad2:
ATA/ATAPI revision 5
device model IC35L040AVER07-0
firmware revision ER4OA41A
cylinders 16383
heads 16
sectors/track 63
lba supported 80418240 sectors
lba48 not supported
dma supported
overlap not supported
Feature Support Enable Value Vendor
write cache yes yes
read ahead yes yes
dma queued yes yes 31/1F
SMART yes no
microcode download no no
security yes no
power management yes yes
advanced power management yes no 0/00
automatic acoustic management yes no 254/FE 128/80
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
